Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Emulators&Plugins (discussion) => Тема начата: TechGuy от 26 Февраля 2021, 23:43:42
-
New CCcam 2.3.9 for MIPS with SkyDE, NC+ and LONG ECM support based on original CCcam2.3.2
DOWNLOAD CCcam 2.3.9 (MIPS) (https://www.cardsharingserver.com/downloads/CCcam2.3.9.mips.zip)
DOWNLOAD CCcam 2.3.9 (ARM) (https://www.cardsharingserver.com/downloads/CCcam2.3.9.arm.zip)
Plugins for all Enigma2 images (OE 2.0): IPK (https://www.cardsharingserver.com/downloads/CCcam2.3.9-ipk.zip), DEB (https://www.cardsharingserver.com/downloads/CCcam2.3.9-deb.zip)
-
Wonderfull, thank you!
Work for me on Dreambox 7020HD
-
Follow readme txt from CCcam 2.3.9 mips ;)
-
I couldn't get it to work. I just simply couldnt find anything in bin or usr\bin folder.
In my received this file is located in "/usr/softcams" (Enigma2 / OpenVIX, VU+ Solo2 and Zgemma H7)
I just thought I mention that this readme file could be amended with this information.
Thanks
-
Fist of all you have to install and get to work original CCCam 2.3.2 - install if via softcam menu or download IPK for your receiver
After this you can just replace old bin-file with new one
-
We just added ARM version for caid 1813 - https://www.cardsharingserver.com/downloads/CCcam2.3.9.arm.zip (https://www.cardsharingserver.com/downloads/CCcam2.3.9.arm.zip), but we need beta-testers to test it.
Please try this version and notify us about the result here
Thanks
-
Ill test it on my Zgemma H7 ARM.
As to previous post I had certainly installed CCCam 2.3.2 but when it gets installed then Enigma2/OpenVIX puts that mips file to /usr/softcams and not usr/bin nor /bin/
Im just saying that "/usr/softcams" location should be added to the readme file.
-
Ive tested it. I can confirm that it is working on my Zgemma H7.
-
Ok, thank you!
-
HI.
I have problem with LONG time ECM. Working about 10 sec then the pictures freezes fo 5 sec and work for 10 sec
I' ve done everything.
New soft 2 times, new Oscam, new ccam,
I do everything as you write. I've downoald the clam 2.3.9 and change this.
Please help me
-
Done.
It is working.
-
HI.
I have problem with LONG time ECM. Working about 10 sec then the pictures freezes fo 5 sec and work for 10 sec
I' ve done everything.
New soft 2 times, new Oscam, new ccam,
I do everything as you write. I've downoald the clam 2.3.9 and change this.
Please help me
I have the same problem. What is the solution?
-
In my case it was /var/emu
My Vu+Zero had no 2.3.2 version (closest were 2.3.0 and 2.3.8), but I used the 2.3.8 version which worked.
Like in readme I replaced the file renaming it, there was a problem with permissions on the first run, but the decoder fixed them and it is working flawlessly now (I copied the file through FTP).
Before this change I was trying to update cccam (with no effect) and I used two versions of oscam - which sometimes worked and sometimes I was expiriencing freezes like mentioned above. I tried one version or another hoping to watch for example a football match.
Now it is working ok.
In general I see that the CCCam is working better and on more channels, but on the other hand I have the impression that Oscam sometimes work on channels, which are not decodec by cccam.
-
I tried to install mgcamd 1.46 and CCcam 2.3.9 from the download area but Canal+ PL is not working, the rest: HBO PL and Sky DE are working
Dreambox 800 with Domica 9.0 Image
What could be the problem?
Thank you!
-
so this will not work in oscam with cccam settings.
-
hi my friend,
which version i must download for vu zero ?
-
hi my friend,
which version i must download for vu zero ?
In my case it was /var/emu
My Vu+Zero had no 2.3.2 version (closest were 2.3.0 and 2.3.8), but I used the 2.3.8 version which worked.
Like in readme I replaced the file renaming it, there was a problem with permissions on the first run, but the decoder fixed them and it is working flawlessly now (I copied the file through FTP).
Before this change I was trying to update cccam (with no effect) and I used two versions of oscam - which sometimes worked and sometimes I was expiriencing freezes like mentioned above. I tried one version or another hoping to watch for example a football match.
Now it is working ok.
In general I see that the CCCam is working better and on more channels, but on the other hand I have the impression that Oscam sometimes work on channels, which are not decodec by cccam.
-
can I use OSCAM 1.2 with CCCAM 2.3.2 for NC+?
on my tuner (Dreambox one) only OSCAM is available
-
can I use OSCAM 1.2 with CCCAM 2.3.2 for NC+?
on my tuner (Dreambox one) only OSCAM is available
User synckonto123 has no active subscriptions.
-
my user is kontakt4tv but I don't have access to email so I can't activate forum account
BTW I'm using OSCAM and CCCAM reader but it looks that is doesn't support CCCAM 2.3.9
In OSCAM the higher version of the CCCAM is 2.3.2.
How to upgrade it it 2.3.9 which is needed for decoding of NC+ provider
-
Follow readme txt from CCcam 2.3.9 mips ;)
-
+----------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------+------------+---------+--------+----------------+-------+-------------------------------+
|xxx.xxx:xxx |00d 00:01:16|CCcam-s2s|2.1.1 |xxxxxxxxxxxxxxx| 2 | |
|xxx.xxx:xxx |00d 00:01:15|CCcam-s2s|2.1.1 |xxxxxxxxxxxxxxxxx| 2 | |
+----------------------+------------+---------+--------+----------------+-------+-------------------------------+
I have connection s2s ver 2.1.1
is it oK? I was expecting 2.3.9
-
connection s2s ver 2.1.1
I have no idea what is s2s. You were recommended to adjust OsCam for your DMOne receiver.
-
I'm testing on other receiver now - OCTAGON SF8008 with CCAM 2.3.9
No TVN so far but POLSAT channels work OK.
Stupid question - on which satellite is TVN ? still on HotBird? It looks that I don't have signal for HBO and TVN channel but all others works fine.
What is going on?
-
www.lyngsat.com
Check
-
SkyDe new encryption? Dark image here
-
Refer to the NEWS in the billing www.cardsharingserver.com
Also here https://www.cardsharing.cc/index.php?topic=35869.msg132370#msg132370
https://www.digitalfernsehen.de/news/inhalte/streaming/sky-aendert-verschluesselung-aus-fuer-receiver-von-drittanbietern-548045/
-
Have you adjusted anything? Currently all channels are working.
-
Works again 8)
-
can I use OSCAM 1.2 with CCCAM 2.3.2 for NC+?
on my tuner (Dreambox one) only OSCAM is available
It works for me. The problem was related with my home infrastructure which has appeared at the same time as TVN coding change and I though that sharing is the issue but problem was related to TV signal.
-
have blackhole 3.1.0 on my Vu+ and I'm using cccam 2.3.2 for Polsat package for years without any problem but recently some of them like "CANAL+ SPORT HD, CANAL+ SPORT 2 HD, CANAL+ PREMIUM HD, CANAL+1, Canal+ Family HD &..." cant be open anymore. so I uninstalled cccam 2.3.2 and then installed 2.3.9 version (ipk version) and then add my config lines to Cccam.cfg as usual. but now, the chanals are open even the chanas that didn't opened earlier. but all package have very bad freezing! every chanal! they are open for 5 or 8 second and then stop for 5 seconds and so on!
so I installed my 2.3.2 version again and everything is fine except that I don't have those chanals I mentioned earlier (CANAL+ SPORT HD, CANAL+ SPORT 2 HD and...) but others (elevens, hbo,...) are opened instantly with zero freeze!
Then I tried the 2.3.9 Mips version. the cccam binary file name in my /usr/bin was "CCcam.mips32el" so I stopped the cam and changed "CCcam2.3.9.mips" to it and then i replaced, it but nothing changed! just like 2.3.2 I still cant open those five or six chanals but others are open and work fine!
I tried 2.3.8 ipk version too just like the 2.3.9 ipk, all chanals are open but with a severe freeze!
if someone please could tell me where is the problem?
-
if someone please could tell me where is the problem?
The problem is that there is no such user JuanCameron in the billing. We cannot recommend you anything because we cannot check your connections history.
Start from here: https://www.cardsharing.cc/index.php?topic=9566.0
After you complete your signature (with your valid login in the billing), we'll see what can be recommended to you.
-
if someone please could tell me where is the problem?
The problem is that there is no such user JuanCameron in the billing. We cannot recommend you anything because we cannot check your connections history.
Start from here: https://www.cardsharing.cc/index.php?topic=9566.0
After you complete your signature (with your valid login in the billing), we'll see what can be recommended to you.
thanks for reply, I'm pretty sure the problem has nothing to do with the server or cccam provider it must be a configuration that I missed somewhere, as I noticed there are some other users with the same problem in the previous page. unfortunately I hadn't bought my service from here, so I just found cardsharing forum and I fascinated how good and up-to-date it is so I thought to give it a try here maybe someone could help with this problem sadly, it seems like I don't get any help from here. but you're doing a great job here. keep it up and thank you anyway...
-
If you mean NC+ package, try this
https://www.cardsharing.cc/index.php?topic=35907.msg132443#msg132443
-
Witam. Czy pomoże mi ktoś zmienić ustawienia w Oscamie Zgemma H9.2S abym mógł oglądać kanały 4K? Pozostałe kanały działają bez problemu. Pakiet VIP Poland. Dzięki i pozdrowienia.
-
Hello. Can someone help me change the settings on the Oscam Zgemma H9. 2S so I can watch 4K channels? The other channels work without any problem. VIP Poland Package. Thanks and regards.
-
https://www.cardsharing.cc/index.php?topic=35225.0
-
Eleven Sports 1 4K (sid 0x070F) can be accessed from Polsat package.
-
Hi I have a problem with canmal plus premium Im using oscam and I have Zgemma H9 .What I should do I have only problems with the canal plus ?
-
Hi I have a problem with canmal plus premium Im using oscam and I have Zgemma H9 .What I should do I have only problems with the canal plus ?
Hi,
There are 2 Cccam emulators used in your receiver:
CCcam 2.1.4 and CCcam 2.3.2
According to the rules of our server, only one emulator shall be used.
Check your receiver settings, delete one of the two emulators.
Also, enter the billing www.cardsharingserver.com, check "Connections history" and read what are your errors. Read the advises what you have to amend.
-
Ok how can I remove 1 of the ccam could you advise me or instruct me .Thanks
-
Some of the channels are freezing some like Canal Plus premium is not working is that because Im using 2 emulators ? Tell me how I can remove 1 of the ccam version fromthis box .Thanks
-
Ok how can I remove 1 of the ccam could you advise me or instruct me .Thanks
Ask technical support of your receiver. How did you set up your receiver for sharing?
-
Hi I have a question through the oscam polish channelsw works but every 1 or 2 minutes the movies is freezing could tell me why is that happen internet connection is ok where i can change something to have everything running smoothly . Thank you
-
Hi I have the same problem with freezing during the watching how can i resolve that?
-
Hi I have the same problem with freezing during the watching how can i resolve that?
https://www.cardsharing.cc/index.php?topic=9566.0
-
Hi I have a question through the oscam polish channelsw works but every 1 or 2 minutes the movies is freezing could tell me why is that happen internet connection is ok where i can change something to have everything running smoothly . Thank you
https://www.cardsharing.cc/index.php?topic=9566.0
-
I have a question through the oscam
You have cccam 2.3.0 installed in your receiver.
Install Oscam, delete Cccam.
If you don't know how to do that, ask the person who adjusted your receiver, otherwise - how did you set up your receiver, if you don't see the difference between Oscam and Cccam and don't know how to adjust emulator? Complete your signature and we'll go on discussing your issue.
Your further posts without signature will be ignored.
Have a nice day.
-
Sorry,
This CCAM 2.3.9 is working for SKY DE? and for Canal + Sport1 and 2? Thanks a lot