Let's start making our settings.
ProgDVB or MyTheatre or any other DVB software is already installed on your PC, we can watch FTA (Free to Air) channels, now we want more, i.e. to use sharing service.
We need csc4.0.0.2 (or 4.0.0.1) plug-in, you can download it from here:
http://www.cardsharing.cc/index.php?topic=1012.0Unpack it (using WinRAR or WinZIP), and put all files to the root directory of:
1. ProgDVB (sometimes it is required for CC-2 especially to put dll(s) to the root directory of the ProgDVB, and the remaining files - to the Plugins folder)
2. MyTheatre - csc.dll is placed to Plugins folder, the remaining files are put to the root directory of the software.
ps. if you made all these operations correctly,
1. You will see Card Server Client when clicking on the Plugins menu (in ProgDVB), and
2. Right-click on the screen of MyTheatre, you will see Plugins in the Menu directory with Card Server Client in sub-menu.
Now we have to configure csc.ini, where all server settings you receive are stored.
For me it was easier to open this file (using NOTEpad) and make my settings in the following format:
ActiveDLL = 1
newcamd525://testlogin:testpassw@81.198.135.145:80001:0102030405060708091011121314
WHERE:
ActiveDLL = 1 - 1-means that the plug-in is active, 0 - it is not active, i.е. the plug-in will not work
testlogin - Your login
testpassw - Your password
81.198.135.145 - IP-address of the server, it can be written numerically as well as in "ABCDE.org" form
80001 - No. of port to access the server
When you edit the entire line please don't forget to save it.
If you made all those settings correctly, you may run the software.
Now let us configure the plug-in via plug-in itself:
1. Start ProgDVB
2. Enter Plugins menu, find CardServer Client Configure Server after which you'll see the following window:
3. In this window you have to write the following:
Protocol: newcamd525
User name: Your login (your login to the sharing server, not to the forum!!!)
Password: Your password (your password to use sharing, not forum!!!)
Card Server IP Address: 81.198.135.145 (or in ABCDE.org format)
Port: No. of port you'll receive
Optional Parameters: 0102030405060708091011121314
After all the fields are filled, the window shall look as follows:
Press
Add Item button, then
Save Configuration (the window must close). That's all. Your configuration of the settings will finish now.
Now let us review how to watch the channels chosen. For example, you have chosen NTV+ package
Click on the channel you need to watch and after a few seconds the picture shall appear. If no picture appears, you'll have to do the following....
Right-click the channel, choose
Properties:
double click CA type required (ID), for example 020710.
You can see this place on the Figure. Then press Apply => ОК. After a few seconds you will see the picture. Please repeat these steps for each particular channel.
P.S. Don't forget to place
msvcr70.dll into the ProgDVB main directory if you use ProgDVB.
Enjoy!