Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => SkyLink HD 23E => Тема начата: fantastic от 21 Ноября 2012, 22:01:10
-
A lot of channels don't work today.
fe: FILMBOX PLUS, JOJ, JOJ PLUS, DOCUBOX HD, FILM+, HBO2, MINIMAX, PRIMA COOL, NOVA CINEMA, MTV CZ, FILMBOX HD
And there is 2-3 sec pause in decoding when I switch on other working channels.
It worked well 3 days ago. What is wrong now?
-
Can anybody else confirm this problem?
Where is your log-file?
-
hi, everything worked perfect until last night. There was information about maintenance on server. Today I can see a lot of freezes and random picture loss across all SkyLink channels. I also tried restart my receiver. I can not provide log because opticum 406 does not have this option. And I have noticed that It takes much longer time to log in to server. I have to wait almost 1 minute for picture, It took only several seconds before.
What have you done on your server until last maintenance?
-
Hi,
SkyLink and CS Link may open longer, because old cards (Cryptoworks) were removed during maintenance. The old cards can open only several channels. 90% of the channels are encrypted with Irdeto cards. So, ports and old IDENTs will be removed during the next few days, and the channels will be opened faster, as before.
regards
-
thanks for fast answer,
only for understanding: these problems will end during next few days and skylink packages will be opened only via new cards. Is It correct?
Are you going to change port for ICE card too?
-
Thx for reply. + Spektrum doesn' t work today.
-
Thx for reply. + Spektrum doesn' t work today.
Spektrum HD is OK. Spektrum SD does not work as it is not included in SkyLink
http://www.lyngsat.com/packages/skylink.html
CAID 0D0F is in the stream - i.e. this is IDENT of old CSLINK. As no CSLink is available any more, the card stopped decoding almost all channels...
-
jj, Spektrum SD, AXN Sci-Fi and AXN Crime are not working with skylink cards. They were available in CSLINK pay package but it seems that they will not be in SKYLINK package. There is information about termination of these channels:
http://www.satcentrum.cz/bleskovky/14929/ukonceni-vysilani-placenych-programu-cs-linku/ (http://www.satcentrum.cz/bleskovky/14929/ukonceni-vysilani-placenych-programu-cs-linku/)
-
Tak teda nevim. Od pátku co jste delali udrzbu nam to nejede. Od pondeli se to vzdy zapne na 5min. a pak dostaneme pokutu 2 hodiny zákaz. Tak nevim kde je chyba. Mame stazene i nove nastaveni 13012013 nastaveni pro Dreambox DM500. Poradte co mame dela, kde je chyba!!!?!?! ****************** Ну, тогда я не знаю. С пятницы, то, что ты сделал с нами происходит обслуживание. С понедельника, она всегда включается на 5 минут. и мы получаем прекрасный запрета двух часов. Так что я не знаю, что это неправильно. Мы также скачать новые настройки 13012013 настройки для Dreambox DM500. Обратиться Дела, что мы имеем, что это ошибка!!!!
-
Логин Mavin, банится за подключения без действующей подписки
Зайдите в биллинге раздел Моя подписка, скопируйте правильные настройки и вставьте в newcamd.list
-
Předplatné plati do 19.01.2013 - udelal jsem i nove nastaveni jak popisujete tady - mgcamd_config_13012013.zip . Zmenil jsem server na 3, ale momentalne mam zase 2h zakaz - Do 11.01.2013 fungovalo vsechno naprosto v poradku, nastaveni nebyl problem. ************************ Подписка действует до 19 января 2013 года - я сделал, и новая установка, как вы описываете здесь - mgcamd_config_13012013.zip. Я изменил сервер 3, но опять же я в настоящее время 2 часа Заказ - 11 января 2013 года в все работало прекрасно, обстановка была не проблема.
-
You are requested to provide the following information:
Re: Your previous subscription:
Port No.
Server No.
Protocol
Re: Your new (prolonged) subscription:
Port No.
Server No.
Protocol
NOTE: In the billing, only one port is left instead of two! (XXX30 and XXX32)
Check and delete the port which is not required! Restart emulator and wait until your ban is finished!
-
Two ports were joined together and only one port is left now (XXX32)
-
i not get any cws from your server...
client write CONNECTED, but i not get any cws, timeout (5004ms)
and i not get any config file with caids for camd3 protocol...
-
i not get any cws from your server...
client write CONNECTED, but i not get any cws, timeout (5004ms)
and i not get any config file with caids for camd3 protocol...
cws is given for newcamd protocol.
Re: camd3, please read here http://www.cardsharing.cc/index.php?topic=28451.0
Port No. is specified in the billing in My subscription table, you will need to add server, port No, your login and password to
cs357x://login:password@server name:12345
-
i have oscam
[reader]
label = server
protocol = camd35
device = .....24.1,..200
user = login
password = passwd
caid = yyyy # i think, is need here list all caids and idents, but i not these get in my account
group = 1
- normally works fine on different servers
- where i show account status? ping to server is normall, i think, in VIP ALL, all must decoded
i not want newcamd, too much lines for edit :-( whjy not wotrk with ccam like card..ara ?
i send PM
-
- how often is possible change server? hourly switch? - red message i show: changed in 6 hours... ???
- where i get port numbers for newcamd?
- i pay and nothing show. oscam is néot compatibile with your camd3? i test before this my camd35 with cardshara but problematic zapping on Skyl.... too (maybe working sur...ck now?)
-
- how often is possible change server? hourly switch? - red message i show: changed in 6 hours... ???
Why are you asking, if you see the message that changed in 6 hours?
- where i get port numbers for newcamd?
In the billing, "My subscription" - in the Table above
(http://s48.radikal.ru/i120/1301/56/7b78d266cefb.png)
- i pay and nothing show. oscam is néot compatibile with your camd3? i test before this my camd35 with cardshara but problematic zapping on Skyl.... too (maybe working sur...ck now?)
You paid, and you never get even FREE test. This is YOUR PROBLEM. Read forum and read the rules.
-
i have oscam
[reader]
label = server
protocol = camd35
device = .....24.1,..200
user = login
password = passwd
caid = yyyy # i think, is need here list all caids and idents, but i not these get in my account
group = 1
- normally works fine on different servers
- where i show account status? ping to server is normall, i think, in VIP ALL, all must decoded
i not want newcamd, too much lines for edit :-( whjy not wotrk with ccam like card..ara ?
i send PM
You need to configure oscam for camd3 protocol.
Read what is recomended for use with our server, and what is not.
http://www.cardsharing.cc/index.php?topic=28915.0
-
because i try original camd_3.902 and your server not respond (rx packet not detected), then please check first, if account is OKAY, i think, not okay, but ping replied correctly from box, then i not know, where is bug.
is possible immediatelly switch to newcamd?
i lost 4 hours with this issue
ps: because i get (with my test) work original camd_3.902 client on my box, read my card from my other box with oscam, i think, bug is outside me
-
Your account must be OK if you can enter the billing system and you don't see the message that your account is blocked. If you connect the server and you see "Login....failed" - it means that your settings are not OK (check your login and password available in the settings).
It is not possible to immediately switch to newcamd. If you switch to newcamd, you will have to wait (you will see the message notifying you when your new settings will be OK).
I don't care - how many hours you spent for the issue, because before connecting the server and buy subscription, it is recommended to take a test. Moreover, there is a free test and you may check your settings and adjust them if necessary.
-
Your camd3.servers file shall look like this:
#
# Sende alle ECMs
cs357x://your login:your password1@server IP:port
#
# use emu remote au
#cs357x://benutzer1:password1:AU_CAID=1801&AU_IDENT=501@192.168.1.1:32897
#
# Sende gefiltert nach Services (z.B nur Start und Film)
#
#cs357x://benutzer3:password3:SERVICES=/var/keys/pw_start.services&SERVICES=/var/keys/pw_film.services@myhost.mydomain:16663
Only 1 line shall be completed and uncommented. All the remaining lines shall be left as it is without any changes.
Also, check if the fillowing files are available in your camd3 emulator:
1. camd3.servers (necessary!!!)
2. camd3.config
3. camd3.keys and
4. camd3.users
2-4 files shall be unchanged! You have edit only camd3.servers file.
-
Are you switching between emu? When you use camd3, did you stop oscam and start camd3? Or you are using oscam for both cases?
You need to press blue button of the remote, select the emu (cam) required and activate it.
-
sure, i stopped all and run only camd3 client... you want show my process list, if not thrust me???
problem is on your sever!!! i switch betweeb camd - newcamd - camd many times, i not know, if apply only in 6:00pm, or i something block... WHY YOU NOT CHECK ACCOUNT?
because my camd client connect to other camd server without problem, then my client is in 100% condition. Maybe someone in Internet is problem, since camd35 is UDP protocol, not TCP?
and test? FREE test is only for NEWCAMD, on different server and i test before 100% working.
Today i buy 3 day test VIP ALL for 3 USD (via new user, then activating immediatelly) and nothing show, sorry!!! Login into camd is Okay, but nothing decoded.
-
Have you read my signature? Which satellites I receive?
I suggest you to try the following line:
cs357x://login:password@serv1:port
You have entered IP address of the server, though fist attempt shall be made with server name, not IP
-
sure i test
s e r v e r 1 . c c
first
but FYI: IP or FQDN is equal, both not work for me, test you? this is not http protocol, then not make any sense, i think.
i have rotor and test 1W, 23E etc.
Try this account and tell me, which packets work!!! Via PM i reached limit 4PM/hour :-////
-
Disconnect from the server, we'll check
-
iam disconnected
-
Last attempt - use other port XXX95 (there are 2 ports). We have checked using OpenPli image, also the same thing - oscam is not working properly.
2013/01/15 19:26:55 2AFE94B0 c root (0624&000000/334A/4A:4144): rejected user ident (0 ms) (of 0 avail 0) (no card support 0624:000000)
We recommend using camd3 (without oscam).
By the way, which image is used for DM800HD?
-
i use Gemini 5.1 and native camd 3.902 native (oldschool) client, not oscam client !
problem is on your server 1, if you not get decoded, then is bug on server !!!
0624 is bad caid, you must decode 0D96, but i not know any prio for camd...
-
I know that 0624 is bad caid, and 0D96 shall be used.
This is not because of server error, but because OSCam was used to check your acc.
Use other firmware (not Pli, neither Gemini) and other version of Camd3. Try Domica image, must work
-
hello suma
my camd3.902 work well against my camd3 server, then confirm me, if my account work for you...
i test now (7:22 moscow time) and not change, not work, time waste
this user account is under http://www.cardsharingserver.com/resellers/index.php?module=subscriptions - then login via http://www.cardsharingserver.com/members.php isnot possible.
-
Have you that problem fixed yet? Is it possible to make new subscriptions that are to be used without login troubles?
-
http://www.cardsharing.cc/index.php?topic=30644.msg93233#msg93233
-
hi, I am connected via one port and I have selected newcamd protocol. I found out that there is another port in add. information for newcamd too. Which port should I use? I am using the first (It was for ICE before) and everything works well. There was second port for CW card before but since the latest changes is only 1 for ICE card. Why have you add another port?
-
hi, I am connected via one port and I have selected newcamd protocol. I found out that there is another port in add. information for newcamd too. Which port should I use? I am using the first (It was for ICE before) and everything works well. There was second port for CW card before but since the latest changes is only 1 for ICE card. Why have you add another port?
Ignore add.information, use the main port
-
hi,
do have someone problems with freezing with channel tv joj? using vu+solo2, mgcamd 1.35, config files from 13.1.2013
my log:
[mg0] newcamd route serverx.xx:xxxxx cant decode (8048ms)
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D03 provid 04 keynr 00
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D70 provid 04 keynr 00
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D0F provid 04 keynr 01
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
[mg0] -> ECM to newcamd serverx.xx:xxxxx
Client -> Server: -- Tue Feb 5 17:12:58 2013
----------------------------------------------------
000: 80 40 7d 81 ff 00 00 78 80 65 00 00 80 06 81 3d .@.....x.e.....=
010: fb c2 2f 80 85 6f 13 68 b1 9d 6f d5 9d bb 41 f9 ../..o.h..o...A.
020: 42 cd bd ce b9 d8 0e 7c 2d 04 d0 56 5a d9 5c 2b B.......-..VZ.\+
030: 36 b5 88 0a ea a4 a7 86 bb d3 d1 7e 1d dc db 9e 6...............
040: 4b d3 16 d2 3a cb c4 85 2e 96 4b 1c de ff ff ff K...:.....K.....
050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 83 ................
070: 01 04 84 02 00 00 df 08 9f c6 9d 4c d4 ad 75 68 ...........L..uh
Client <- Server: -- Tue Feb 5 17:13:06 2013
----------------------------------------------------
000: 80 00 00 ...
[mg0] newcamd route serverx.xx:xxxxx cant decode (8046ms)
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D03 provid 04 keynr 00
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D70 provid 04 keynr 00
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D0F provid 04 keynr 01
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
[mg0] -> ECM to newcamd serverx.xx:xxxxx
Client -> Server: -- Tue Feb 5 17:13:07 2013
----------------------------------------------------
000: 81 40 7d 81 ff 00 00 78 80 65 00 00 80 06 81 3d .@.....x.e.....=
010: 06 56 0e ec 8b f0 73 77 ac bb 57 28 fc b1 78 72 .V....sw..W(..xr
020: 9f f4 c6 45 b3 ff 03 b9 9e ab 40 4f a6 ab b3 a1 ...E......@O....
030: ca b5 1b dc 0d b6 2b 3d 0e 91 80 43 e8 e0 b1 b4 ......+=...C....
040: 5b bb 3a a0 78 f1 a5 af fc df ea ef f1 ff ff ff [.:.x...........
050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 83 ................
070: 01 04 84 02 00 00 df 08 4b fa fd 49 93 10 1c 8e ........K..I....
Client <- Server: -- Tue Feb 5 17:13:15 2013
----------------------------------------------------
000: 80 00 00 ...
[mg0] newcamd route serverx.xx:xxxxx (8039ms)
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D03 provid 04 keynr 00
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D70 provid 04 keynr 00
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D0F provid 04 keynr 01
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
[mg0] -> ECM to newcamd serverx.xx:xxxxx
Client -> Server: -- Tue Feb 5 17:13:15 2013
----------------------------------------------------
000: 80 40 7d 81 ff 00 00 78 80 65 00 00 80 06 81 3d .@.....x.e.....=
010: 20 ba f6 7e 22 7f 20 69 6c b0 ca 90 c3 93 f4 89 ...". il.......
020: 49 45 47 89 98 df c0 15 c1 33 59 33 aa dd 49 0e IEG......3Y3..I.
030: 68 d9 4c 3a 9b 2d 24 80 6d f5 a2 13 d5 1b a5 68 h.L:.-$.m......h
040: dc 9d e3 b8 f5 45 6a fc 19 87 2c e6 9c ff ff ff .....Ej...,.....
050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 83 ................
070: 01 04 84 02 00 00 df 08 64 c8 29 85 2b 87 21 74 ........d.).+.!t
Client <- Server: -- Tue Feb 5 17:13:15 2013
----------------------------------------------------
000: 80 10 10 7d 97 97 ab 96 63 81 7a 8e e6 fb 6f c7 ........c.z...o.
010: 55 62 7e Ub.
-
Have you adjusted your mg_cfg file correctly? for VU+?