SRG Package down?

[suma]

I see, but with the introduction of new soft on the server https://www.cardsharing.cc/index.php?topic=18962.msg99387#msg99387
Please take it into consideration. 8 months are passed, now you need to adjust your receiver to be used with our new soft.

[suma]

The package is working

Dec 20 20:57:32 192.168.1.34 [mg0] <- CW from newcamd xxxxxx:XXXXX (461ms)
Dec 20 20:57:32 192.168.1.34 [mg0] 461 msec -- Fri Dec 20 20:57:24 2013
Dec 20 20:57:32 192.168.1.34 ===== Viaccess ECM on CaID 0x0500, pid 0x02d8 ======
Dec 20 20:57:32 192.168.1.34 prov: 040810
Dec 20 20:57:32 192.168.1.34 cw0:0 4D 93 A2 82 7F 8C C2 CD
Dec 20 20:57:32 192.168.1.34 cw1:0 62 06 6F D7 53 FA 62 AF

[Kabong]

The following channels in the package are not working for me.

SRF zwei
RTS Deux   
RSI LA 2

I am the only who has these problem or are the channels down for everyone?


Best regards

[suma]

I do not see SRG SWISS in Vip Lite package at all. It must not work.
Please refer to the billing

[nicocin]

Hello

are there any problems with this package? I can't decode the channels anymore:

2014/10/23 18:04:53 1851 610FF4B0 c dvbapi: [ADD PID 0] CAID: 0500   ECM_PID: 02E3   PROVID: 050800
2014/10/23 18:04:53 1851 610FF4B0 c dvbapi: [ADD PID 1] CAID: 0500   ECM_PID: 02D9   PROVID: 040810
2014/10/23 18:04:53 1851 610FF4B0 c dvbapi: [ADD PID 2] CAID: 0500   ECM_PID: 02CF   PROVID: 023800
2014/10/23 18:04:53 1851 610FF4B0 c dvbapi: new program number: 4331 (SF1 HD)
2014/10/23 18:04:53 1851 610FF4B0 c dvbapi (0500&050800/4331/02E3/0000/30:A411/00-00): rejected group (129 ms) (no matching reader)
2014/10/23 18:04:55 1851 610FF4B0 c dvbapi (0500&040810/4331/02D9/0000/30:A31E/00-00): not found (1770 ms) by "vip_all_ultra_!!!_" (2 of 2)
2014/10/23 18:04:55 1851 610FF4B0 c dvbapi: try pids again #1
2014/10/23 18:04:55 1851 610FF4B0 c dvbapi (0500&023800/4331/02CF/0000/2A:3AA8/00-00): not found (233 ms) by "vip_all_ultra_!!!_" (2 of 2)
2014/10/23 18:04:55 1851 610FF4B0 c dvbapi (0500&050800/4331/02E3/0000/30:A411/00-00): rejected group (121 ms) (no matching reader)
2014/10/23 18:04:59 1851 610FF4B0 c dvbapi (0500&040810/4331/02D9/0000/30:A311/00-00): not found (1835 ms) by "vip_all_ultra_!!!_" (2 of 2)
2014/10/23 18:04:59 1851 610FF4B0 c dvbapi: try pids again #2
2014/10/23 18:04:59 1851 610FF4B0 c dvbapi (0500&023800/4331/02CF/0000/2A:3AA9/00-00): not found (218 ms) by "vip_all_ultra_!!!_" (2 of 2)
2014/10/23 18:05:00 1851 610FF4B0 c dvbapi (0500&050800/4331/02E3/0000/30:A41E/00-00): rejected group (121 ms) (no matching reader)
2014/10/23 18:05:01 1851 610FF4B0 c dvbapi (0500&040810/4331/02D9/0000/30:A31E/00-00): timeout (5017 ms) by "vip_all_ultra_!!!_" (2 of 2) (try 2)
2014/10/23 18:05:05 1851 610FF4B0 c dvbapi: try pids again #3
2014/10/23 18:05:05 1851 610FF4B0 c dvbapi: can't decode channel
2014/10/23 18:05:05 1851 610FF4B0 c dvbapi (0500&040810/4331/02D9/0000/30:A311/00-00): timeout (5201 ms) by "vip_all_ultra_!!!_" (2 of 2) (try 2)
2014/10/23 18:05:06 1851 610FF4B0 c dvbapi: can't decode channel
2014/10/23 18:05:06 1851 610FF4B0 c dvbapi (0500&023800/4331/02CF/0000/2A:3AA9/00-00): timeout (5203 ms) by "vip_all_ultra_!!!_" (2 of 2) (try 2)



edit: ok I saw the news now

[suma]

https://www.cardsharing.cc/index.php?topic=32770.0

[suma]

Fixed, it's OK now

[Gus13]

 SRF 1, SRF 2...no picture since yesterday

[suma]

We'll check

[tronic1704]

Hi,

are there any problems with the SRG package? All channels from the VIP package run great with an average timing of approx. 500 ms.
With the SRG package, the ECM response usually takes around 1060ms.

The picture freezes approximately every 10 seconds. In the LIVE log I observe that it works for 2 keys.
The picture then mostly freezes at the 3rd key. However, the log shows no errors, a key comes every 10 seconds.
This only affects the SRG package. Here is an excerpt from the Oscam log:

2020/06/11 05:03:12 (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
2020/06/11 05:03:12 (dvbapi) Demuxer 0 found 2 ECMpids and 8 STREAMpids in caPMT
2020/06/11 05:03:12 (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1
2020/06/11 05:03:12 (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0500 PROVID 050800 ECMPID 02E3 ANY CHID PMTPID 01FF VPID 0200
2020/06/11 05:03:13    (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): cache1 (7 ms) by "S1-SRG-SWISS" (P/2/4/4) - SRF zwei HD (cw count 2)
2020/06/11 05:03:13 (dvbapi) Demuxer 0 found 2 ECMpids and 8 STREAMpids in PMT
2020/06/11 05:03:17    (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1067 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:27    (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1073 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:37    (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1064 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:47    (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1061 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:57    (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1065 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD

This is the configuration for the SRG package:

[reader]
label                         = "S1-SRG-SWISS"
protocol                    = newcamd
device                       = XXXXXX.xxx,00000
key                           = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
user                          = **user**
password                   = **********
inactivitytimeout        = 300
group                        = 1
disablecrccws             = 1
audisabled                 = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident                           = 0500:050800,040810

Please check it, Thanks..

[suma]

Hi, Moderator is notified, we'll check

[suma]

You have 99% wrong OsCam. Up to 1000 ms is normal. Try cccam2.3.2_de with Cccam protocol, or use other version of OsCam or check recommended settings here https://www.cardsharing.cc/index.php?topic=35019.msg125782#msg125782

[malone7]

SRF1 and SRF2 not working here. SRF Info (unscrambled) works.
All other purchased packages are working.
@Mod
Can you check?