Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Configs => OSCam => Тема начата: catman1 от 05 Января 2018, 02:07:41
-
Hi guys
I have a VIP all account. do you have the right files to download for my receiver (obviously less oscam.server)?
many thaks
-
I have put the files in oscam.server and it still does not open encrypted channels.
I have tried both protocols (cccam and newcamd).
it used to work on vu+duo with cccam and mgcamd.
Is there anything else I need to change like oscam.user or oscam.conf?
help is much appreciated
-
https://www.cardsharing.cc/index.php?topic=35019.0
https://www.cardsharing.cc/index.php?topic=35020.0
-
Thank you for the links.
It is quite a lot to read. Could you just post a oscam.config file which works on most receivers, this cardsharing server and a short "how to" modify conf file as necessary
many thanks
-
Unfortunately, we have only general default settings working on most of receivers for MgCamd emulator.
If it is too difficult for you to read a lot and follow the instructions, well, wait for anybody who will share oscam.config file with you.
As for me, I have edited only one file - oscam.server. All other files were left as it is.
-
may I have your file please. at least it gives me an idea of the parameters
-
may I have your file please. at least it gives me an idea of the parameters
Read item 6 of my description
https://www.cardsharing.cc/index.php?topic=35019.0
-
I am not new to enigma
I have used mgcamd and cccam until now on a VU+ duo which worked like a treat.On DM920HD I have to use oscam which I don't know how to configure. I have put the files in oscam.server (both protocols newcamd and cccam) but it does not clear any enctypted channels.
So I return to my initial request.
Could I have a .conf and a .user file who is working on your server pretty please again?
-
Hi Catman1,
I found to be also new user of nice DM9020UHD box and I have same VIP package. I got it partly working, no NTV+. It would be welome, if somebody more advanced in Oscam could send mentioned file to the moderators. I think, they would put them ASAP online, to help customers.
Best Regards,
Indrek
-
I have put the files in oscam.server (both protocols newcamd and cccam) but it does not clear any enctypted channels.
But you are aware, that you are only allowed to use one protocol - either Newcamd OR Cccam ?! anything else would be a rule violation
I really do not understand, the manually clearly say: go to My subscription > select Newcamd protocol settings > select Oscam settings > save content as oscam.server - there is nothing about "mix up any settings you find together if you think it might do better"
Go to the thread suma mentioned. I add a post that contains a oscam.conf and oscam.user file you might try to use (and perhaps also some information worth to read). This basic oscam settings work on my box, I am not sure it will work for your STB.
-
I have put the files in oscam.server (both protocols newcamd and cccam) but it does not clear any enctypted channels.
But you are aware, that you are only allowed to use one protocol - either Newcamd OR Cccam ?! anything else would be a rule violation
I really do not understand, the manually clearly say: go to My subscription > select Newcamd protocol settings > select Oscam settings > save content as oscam.server - there is nothing about "mix up any settings you find together if you think it might do better"
Go to the thread suma mentioned. I add a post that contains a oscam.conf and oscam.user file you might try to use (and perhaps also some information worth to read). This basic oscam settings work on my box, I am not sure it will work for your STB.
Maybe i wasn't clear enough. I have used them in turn not both at the same time.
-
I read all the post at least 10 times.still does not work
below is my conf file (i can connect to oscam via webif and oscam is running)
do I need to add or modify anything?
[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
bindwait = 20
nice = -1
maxlogsize = 1000
[cache]
max_time = 18
[streamrelay]
[dvbapi]
pmt_mode = 0
delayer = 60
boxtype = dreambox
[webif]
httpport = 8888
httpuser = root
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httposcamlabel = OscamDreambox
do we need to change or add anything in .user?
my configuration below
[account]
user = DVBApi
keepalive = 1
au = 1
group = 1
-
My files from Oscam-emu are as follows:
oscam.conf
[global]
disablelog = 0
disableuserfile = 0
usrfileflag = 0
maxlogsize = 10
preferlocalcards = 1
saveinithistory = 1
lb_mode = 0
unlock_parental = 1
[cs378x]
port = 12005
[webif]
httpport = 8081
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
[dvbapi]
enabled = 1
pmt_mode = 6
au = 0
user = dvbapiau
boxtype = dreambox
oscam.server
[reader]
label = "main_cardsharing.cc_XXXXX"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,XXXXX
user = login
password = password
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0500:060С00,042300,041700,023100,042800,042820,043800,050C00,041200,050F00,024700
[reader]
label = "main_cardsharing.cc_XXXXX"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,XXXXX
user = login
password = password
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 1861:000000,007001,007101
oscam.user
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1
au = 1
[account]
user = 2nd_box
pwd = 2nd_box
group = 1
Please be noted that this is not universal config valid for all receivers and it does not mean that it will work for you. My version of oscam is OSCam downloaded from the feed (Bluepanel in Dreamboxes): 1.20-unstable_svn.
I have VU+Zero and it works with my receiver.
If you fail with these settings, my advice is to find any DM920HD support forum and to look for any oscam related information there. Your receiver is relatively new and, probably, has poor support. Try to find any information on the images (firmware) used in your receiver and read forums re: emulator behavior under your particular image.
-
Thank a lot Suma :)
Indrek
-
@catman1
you should not read the postings 10 times, its enough to understand it once.
As I mentioned I added a oscam.conf + .user file to my post within the thread suma provided - not downloaded by you now
Regarding your one file and the [dvbapi]section: as long as you do not enter an enable = 1 DVBAPI mode is not active (is that what you want ? do you have an aditional emulator like Mgcamd or CCcam ative on your box ?? than why do you try to use Oscam for connection to the server ???
if you want to use DVBAPI (most likely) you need to enable it http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.conf#enabled = disabled is default = as long as this item is not mentioned with different setting default is used = DVBAPI-mode disabled
PS: why don't you use the webinterface of Oscam ? you will simply see within the menu Configuration > DVPBAPI that on your system DVBAPi is not active.
And for all (at least most) items which can be configured in Oscam = which are also available and visible in WebIF you can click on the name of the function and get directly forwarded to an explanation if this setting - it could not be easier :)
-
Hi Catman1,
I found to be also new user of nice DM9020UHD box and I have same VIP package. I got it partly working, no NTV+. It would be welome, if somebody more advanced in Oscam could send mentioned file to the moderators. I think, they would put them ASAP online, to help customers.
Best Regards,
Indrek
Hi Indrek
could you post all 3 files (obviously less sensible information) or email them to me as I just can't clear any channels. At least you are clearing some channels but I have no success whatsoever. I have newnigma2 image on my box.
I installed wicardd and still does not clear the channels.
I am going mad
-
My files from Oscam-emu are as follows:
oscam.conf
[global]
disablelog = 0
disableuserfile = 0
usrfileflag = 0
maxlogsize = 10
preferlocalcards = 1
saveinithistory = 1
lb_mode = 0
unlock_parental = 1
[cs378x]
port = 12005
[webif]
httpport = 8081
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
[dvbapi]
enabled = 1
pmt_mode = 6
au = 0
user = dvbapiau
boxtype = dreambox
oscam.server
[reader]
label = "main_cardsharing.cc_XXXXX"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,XXXXX
user = login
password = password
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0500:060С00,042300,041700,023100,042800,042820,043800,050C00,041200,050F00,024700
[reader]
label = "main_cardsharing.cc_XXXXX"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,XXXXX
user = login
password = password
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 1861:000000,007001,007101
oscam.user
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1
au = 1
[account]
user = 2nd_box
pwd = 2nd_box
group = 1
Please be noted that this is not universal config valid for all receivers and it does not mean that it will work for you. My version of oscam is OSCam downloaded from the feed (Bluepanel in Dreamboxes): 1.20-unstable_svn.
I have VU+Zero and it works with my receiver.
If you fail with these settings, my advice is to find any DM920HD support forum and to look for any oscam related information there. Your receiver is relatively new and, probably, has poor support. Try to find any information on the images (firmware) used in your receiver and read forums re: emulator behavior under your particular image.
I am attaching the full configuration taken from webif. Could you check all the values and instruct me to change as necessary or snap and post a picture here. I am going on 5 days now being unable to set up the box
many thanks
PS
I have also installed wicardd 1.19 and still does not clear the channels. It must be something sinister here.
-
I think, you have to start from the very beginning. Re-install image (maybe, you need to change it) and install emulator.
-
Hi Catman1,
I found to be also new user of nice DM9020UHD box and I have same VIP package. I got it partly working, no NTV+. It would be welome, if somebody more advanced in Oscam could send mentioned file to the moderators. I think, they would put them ASAP online, to help customers.
Best Regards,
Indrek
Good morninf indrek,
could you tell me what image you have installed and how dis you set it up please?
Many thanks
-
Good morninf indrek,
could you tell me what image you have installed and how dis you set it up please?
Many thanks
Read indrek70's signature, everything is mentioned there and complete yours.
https://www.cardsharing.cc/index.php?topic=24581.0
-
Already did but nothing is mentioned about DM920
-
As Is so hard to configure and is not a lot of support I have returned the Dreambox and I bought a vu+ Ultimo 4k