Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => SkyLink HD 23E => Тема начата: iv119 от 21 Февраля 2013, 00:41:01
-
Здравствуйте,
I have purchased in January VIP Hotbird and Sky Germany, which have been working OK without problem both on my previous configuration (Openbox X820, Mgcamd/MPCS). Last week I ugraded to Xtrend Et4000+ Mgcamd 1.35/Oscam. Also here both packest are working OK.
Yesterday I purchased new Skylink, but unfortunately does not work in any way.
In My Subscription I received CWS line, which was added to my newcamd.list, here can be no problem.
Further I received from administrators settings for Oscam as follows:
[reader]
Label = "SkyLink HD 23E"
Protocol = newcamd
Key = 0102030405060708091011121314
Device = *********************
Account = ***********************
Fallback = 0
Group = 1
Caid = skylink
Ident =
With given unusual Caid/Ident Skylink does not work. (Oscam.server and Oscam.user I tried to edit in usual way)
I tried also Caid 0d96 or even 0624, but nothing helped.
Where can be the problem, when two other packets work OK? Has Skylink some black-out?
When I take a free test two weeks ago, it worked.
Thank you for your advice. Спасибо!
-
Problem solved over the night, my settings were ok,but Skylink was not running. Now it runs on all channels. Otázka je jak dlouho, ze zdejších diskusí se zda, ze SL ma caste vypadky.
-
Please look through the forum http://www.cardsharing.cc/index.php?board=80.0 and tell me - when was the problem with the package last time? If there is a problem with the package, not only you but a lot of users would have posted here.
-
Please look through the forum and tell me - when was the problem with the package last time?....................
Well, I cannot compare, when was the last problem with Skylink. I never had Skylink before and bought just a first new subscription 2 days ago and unfortunately exactly that days Skylink was not running on my Xtrend. I did not make any changes in my settings,was thinking that problem might has been in my settings, but from this morning my subscription is running full and OK. Please, consider the problem for solved, no new action from your side is needed. Спасибо за поддержку.
-
Am I the only one without Sport2 now? Everything else on Skylink is working.
-
Am I the only one without Sport2 now? Everything else on Skylink is working.
Same with TV Paprika and both Filmboxes (all the same TP).
Please have a look.
-
Am I the only one without Sport2 now? Everything else on Skylink is working.
Same with TV Paprika and both Filmboxes (all the same TP).
Please have a look.
- 25.02.2013: Skylink - maintenance until tomorrow 11:00 CET. Some channels are not available.
Sorry.
-
Hello everybody,
is working skylink today or not? I have black screen more than an hour...
-
Hello everybody,
is working skylink today or not? I have black screen more than an hour...
Which server?
Where is your log-file?
-
Working
[mg0] -> ECM to newcamd serv2:XXXX24 [mg0]
<- CW from newcamd serv2:XXX24 (101ms)
[mg0] 101 msec -- Sun Mar 31 20:04:35 2013
system: Cryptoworks caid: 0x0D96 pid: 0x0f00 prov: 000004
cw0:0 87 19 8B 2B 0D DD 44 2E
cw1:0 0E 0E 38 54 E6 3C 1B 3D
-
sorry for the uncomplete post, but I just like to send a message, package started.. I have to write more often ;)
but adds, that it was server1..
log:
Mar 31 18:06:03 192.168.100.105 [mg1] stoping camd..
Mar 31 18:06:04 192.168.100.105 [mg1] service 13ED index 1 pmt pid 0 (1)
Mar 31 18:06:04 192.168.100.105 CaPID: 0x0457 ProvID: 000000
Mar 31 18:06:04 192.168.100.105 CaPID: 0x0461 ProvID: 000000
Mar 31 18:06:04 192.168.100.105 CaPID: 0x046B ProvID: 000000
Mar 31 18:06:04 192.168.100.105 CaPID: 0x0475 ProvID: 000000
Mar 31 18:06:04 192.168.100.105 CaPID: 0x047F ProvID: 000000
Mar 31 18:06:04 192.168.100.105 CaPID: 0x0493 ProvID: 000000
Mar 31 18:06:04 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D03 provid 04 keynr 00
Mar 31 18:06:04 192.168.100.105 [mg1] network can't decode
Mar 31 18:06:04 192.168.100.105 [mg1] pid 0x0457 failed to decode.
Mar 31 18:06:04 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D70 provid 04 keynr 00
Mar 31 18:06:04 192.168.100.105 [mg1] network can't decode
Mar 31 18:06:04 192.168.100.105 [mg1] pid 0x0461 failed to decode.
Mar 31 18:06:05 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D0F provid 04 keynr 01
Mar 31 18:06:05 192.168.100.105 [mg1] network can't decode
Mar 31 18:06:05 192.168.100.105 [mg1] pid 0x046B failed to decode.
Mar 31 18:06:05 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Mar 31 18:06:05 192.168.100.105 ECM to newcamd serv1:XXX32
Mar 31 18:06:05 192.168.100.105 [mg1] <- CW from newcamd serv1:XXX32 (42ms)
Mar 31 18:06:05 192.168.100.105 [mg1] 42 msec -- Sun Mar 31 16:06:04 2013
Mar 31 18:06:05 192.168.100.105 ===== Cryptoworks ECM on CaID 0x0D96, pid 0x0475 ======
Mar 31 18:06:05 192.168.100.105 prov: 000004
Mar 31 18:06:05 192.168.100.105 cw0:1 AA 75 D2 F1 66 FE 1C 80
Mar 31 18:06:05 192.168.100.105 cw1:1 22 2E 96 E6 C6 A9 0D 7C
Mar 31 18:06:05 192.168.100.105 ECM to newcamd serv1:XXX32
Mar 31 18:06:05 192.168.100.105 [mg1] <- CW from newcamd serv1:XXX32 (223ms)
Mar 31 18:06:05 192.168.100.105 [mg1] 223 msec -- Sun Mar 31 16:06:05 2013
Mar 31 18:06:05 192.168.100.105 ===== Cryptoworks ECM on CaID 0x0D96, pid 0x0475 ======
Mar 31 18:06:05 192.168.100.105 prov: 000004
Mar 31 18:06:05 192.168.100.105 cw0:1 3C 54 B4 44 EA C1 5C 07
Mar 31 18:06:05 192.168.100.105 cw1:1 22 2E 96 E6 C6 A9 0D 7C
Mar 31 18:06:15 192.168.100.105 ECM to newcamd serv1:XXX32
Mar 31 18:06:15 192.168.100.105 [mg1] <- CW from newcamd serv1:XXX32 (260ms)
Mar 31 18:06:15 192.168.100.105 [mg1] 260 msec -- Sun Mar 31 16:06:15 2013
-
Yes, I see, sorry.. are some errors in the log or not?
-
Check your log-file and compare it to mine.
In my log:
caid: 0x0D96 pid: 0x0f00 prov: 000004
In yours:
Mar 31 18:06:04 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D03 provid 04 keynr 00
Mar 31 18:06:04 192.168.100.105 [mg1] pid 0x0457 failed to decode.
Mar 31 18:06:04 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D70 provid 04 keynr 00
Mar 31 18:06:04 192.168.100.105 [mg1] pid 0x0461 failed to decode.
Mar 31 18:06:05 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D0F provid 04 keynr 01
Mar 31 18:06:05 192.168.100.105 [mg1] pid 0x046B failed to decode.
Mar 31 18:06:05 192.168.100.105 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sometimes, right CAID, IDENT and pids are seen in your log:
Mar 31 18:06:05 192.168.100.105 ===== Cryptoworks ECM on CaID 0x0D96, pid 0x0475 ======
Mar 31 18:06:05 192.168.100.105 prov: 000004
Mar 31 18:06:05 192.168.100.105 cw0:1 AA 75 D2 F1 66 FE 1C 80
Mar 31 18:06:05 192.168.100.105 cw1:1 22 2E 96 E6 C6 A9 0D 7C
Are you using softcam.key in your emulator?
WARNING: Never show port No. in your log! You can have ban!
-
I see that you zaped different channels, but in generally, your log is good:
Mar 31 18:06:05 192.168.100.105 ECM to newcamd serv1:XXX32
Mar 31 18:06:05 192.168.100.105 [mg1] <- CW from newcamd serv1:XXX32 (42ms)
Mar 31 18:06:05 192.168.100.105 [mg1] 42 msec -- Sun Mar 31 16:06:04 2013
Mar 31 18:06:05 192.168.100.105 ===== Cryptoworks ECM on CaID 0x0D96, pid 0x0475 ======
Mar 31 18:06:05 192.168.100.105 prov: 000004
Mar 31 18:06:05 192.168.100.105 cw0:1 AA 75 D2 F1 66 FE 1C 80
Mar 31 18:06:05 192.168.100.105 cw1:1 22 2E 96 E6 C6 A9 0D 7C
Mar 31 18:06:05 192.168.100.105 ECM to newcamd serv1:XXX32
Mar 31 18:06:05 192.168.100.105 [mg1] <- CW from newcamd serv1:XXX32 (223ms)
Mar 31 18:06:05 192.168.100.105 [mg1] 223 msec -- Sun Mar 31 16:06:05 2013
Mar 31 18:06:05 192.168.100.105 ===== Cryptoworks ECM on CaID 0x0D96, pid 0x0475 ======
Mar 31 18:06:05 192.168.100.105 prov: 000004
Mar 31 18:06:05 192.168.100.105 cw0:1 3C 54 B4 44 EA C1 5C 07
Mar 31 18:06:05 192.168.100.105 cw1:1 22 2E 96 E6 C6 A9 0D 7C
Mar 31 18:06:15 192.168.100.105 ECM to newcamd serv1:XXX32
Mar 31 18:06:15 192.168.100.105 [mg1] <- CW from newcamd serv1:XXX32 (260ms)
Mar 31 18:06:15 192.168.100.105 [mg1] 260 msec -- Sun Mar 31 16:06:15 2013
It is working for you.
-
Advice: use our ignore and proirity lists
0D03 and 0D70 shall be added to ignore.list, and 0D96 - in priority.list
-
I still use your ignore and priority list..
no softcam.key
sorry for the showing port, I did not think it almost in every line of the log.. :-\
-
Advice: use our ignore and proirity lists
0D03 and 0D70 shall be added to ignore.list, and 0D96 - in priority.list
I checked ignore a priority list, but not found these numbers..
-
Then, flash your receiver with the latest firmware. Your receiver cannot select right CAID and IDENT.
-
sorry for the showing port, I did not think it almost in every line of the log.. :-\
It's because I deleted half of your log, and replaced port No. with XXXXX in the remaining part of the log ;D
-
Your receiver cannot select right CAID and IDENT.
I do not know exactly what that means, but I'm trying to understand.. ;)
-
P.S. Are you using default mg_cfg file from our server? Correct work of your emulator may also depend on it.
-
I use only the files from your server.. ignore, priority.list, mg-cfg, etc..
-
Hello,
blackout now, or not?
-
not working for me.nothing atall
-
does not work VIP Czech
-
yes, about two hours earlier all skylink channels stop work
-
Fixed
-
while I searching how to get log file to post here it start works. so for next time, i'm ready to post log
-
SkyLink is changing keys 2-3 times a day. That is why, you (and we) have some problems.
-
since yesterday all premium programs do not work - the second day. . . :'(
-
from twitter : 10 апреля, начиная с 23:00 технические работы. Замена серверного оборудования. SkyDE, UPC, Slylink, SkyUK и RedLight будут недоступны.
-
from twitter : 10 апреля, начиная с 23:00 технические работы. Замена серверного оборудования. SkyDE, UPC, Slylink, SkyUK и RedLight будут недоступны.
April 10, starting from 23:00 technical maintenance. Server equipment upgrade. SkyDE, UPC, Slylink, SkyUK and RedLight will be unaccessible.
-
Hi, have someone ignore.list, priority.list and replace.list for mgcamd for skylink 23,5 HD
-
http://www.cardsharing.cc/index.php?topic=28088.0
-
skylink is not working again. Services stopped cca 10 minutes ago and still not working. Receiver is connected but in line GET ECM there is status CW FAILED.
-
Thanks, will check
-
Fixed
-
Still not working...
-
Channel Fooor...
-
server ?
-
Server1, working now thanks...