Freezes with dual login

[Miguel]

Hi,

i have purchased the VIP Germany package with dual login option.
Sometime when i record a movie and watch another channel i have a long freeze about every 5 seconds.
When i cancel the recording and watch only, all runs fine.
For example yesterday evening i record on Sky Cinema HD and watch Pro7. On Pro7 i have freezes and are impossible to watch the movie. From the moment i cancel the record i watch without any freeze.
I try the same this morning and both channels (record one and watch another) run fine.

My internet connection have always a speed of 16Mbps and a Ping around 10ms.
I have a Dreambox 7080 with CCcam 2.3.0
The line in CCcam.cfg is:
DISABLE EMM : yes
C: server_45 XXX04 user pswd

It`s possible that the cardsharingserver is overload in rushhours ?

[suma]

Hi,
From you message, I see that you use CCcam 2.3.0
But from your signature, it is stated that you use MGCamd 1.38 and Oscam 1.20
From your statistics - there is no rules violation. Everything is OK.

[Miguel]

Hi,

thank you for the fast answer!

Yes it is correct, i use only CCcam 2.3.0
I have just updatet my profile.

Whats the reason for the many freezes?

[suma]

During freezes, you need to check the route and tracert to the server (WinMTR utillity). I think, some hops are lost somewhere on the route to the server (maybe).

[suma]

One more advice: try other emulator. Probably, your cccam cannot resist double load: one channel watching and the other one recording. Try mgcamd 1.35(a)

[Miguel]

Hi,

i tried to use mgcamd 1.35a but not run. Black screen

I check if in mg_cfg i have    G: { 32 } parameter
Also i add my C Line in usr/keys/cccamd.list


Because this i have continued to use cccamd 2.3.0.
I dont`t think the freeze problem is connected by EMU because the problem is present mostly in evening.
In the morning never i had freezes.

While the problem is present i maked ping tests:
Ping to server_45  47ms
Ping to google.com    26ms
Ping to local provider 12ms

I think the connection it`s ok.

With this tests i have excluded a problem on my receiver and the internet connection.
It`s possible that your server/cardreader in the evening hours is overloaded because many users are connected?

[suma]

G: { 32 } parameter is used if you use Cccam protocol via MgCamd emulator (with the only port).
For all other cases, G: { 01 } is used, if you use MgCamd.
It is not clear which protocol and which emulator is used in your case. You mixed everything.
Result - freezes.

[Miguel]

I`m confused.
I use only the settings shown in my subscription page

For MGcamd 1.35a:

Settings for emulator MGCAMD for Cccam protocol
The configuration file - /var/keys/cccamd.list

In order to make Cccam protocol to be active within mgcamd emulator, it is required to specify G: { 32 } parameter in mg_cfg file. C-lines should be added to /var/keys/cccamd.list file.


and for CCcam 2.3.0:

Settings for emulator CCCAM for Cccam protocol
The configuration file - /etc/CCcam.cfg

To avoid ban of your account due to frequent reconnections when using CCCam emulator, you need to DISABLE an option of sending EMM requests to the server in (/etc/CCcam.cfg) file. For this purpose, find and uncomment (or add) the following parameter: DISABLE EMM : yes
If the line starts with # symbol at the beginning, please delete it.

Please let me know if this is wrong.
Normally i use only CCcam 2.3.0 but you invite me to try MGcamd.

[suma]

I asked you to try MgCamd 1.35. Why are you using mgcamd emulator for cccam protocol?
I asked you to try MgCamd 1.35. All settings shall be for mgcamd, not for cccam

https://www.cardsharing.cc/index.php?topic=27889.0

[Miguel]

Ok, now i understand what you mean.
Sorry i`m inexperienced with Linux &Co.

I download the file package from your signature, delete old files on my box and copy your files to the box to usr/keys/
Then i change the permissions of this files to 644.
In newcamd.list i add the cws lines from my subscription.
I check that mg_cfg  have    G: { 01 }
I have still a black screen.

What i do wrong?

[suma]

Then i change the permissions of this files to 644.

Must be 755

[Miguel]

Ok changed to 755 but not run 

[suma]

Just changed parameter without restarting box?

[suma]

Moreover, you have to disable all other emulator and leave only Mgcamd running.
For black screen, I will need a log-file.
How to make a log-file - https://www.cardsharing.cc/index.php?topic=26069.0
Then, be sure that in the var\keys folder, no softcam keys are available. You may also delete ignore, priority lists, if any. They will not make weather for Dreambox. Lunux-based receivers are quite clever machines.

[Miguel]

Hi again,

i have only MGcamd running.
Also i delete the ignore and priority lists
I don`t have the folder var/keys  but  usr/keys
Now in this folder are the following files:

cccamd.list   (i exclude all lines with #)
mg_cfg.list
newcamd.list
peer.cfg
replace.list

I install the 3CSyslog on my old Windows XP Laptop, set Box IP in the program and open port 514 in firewall of windows.
I make a port forwarding rule in my router
Also i modify the L line in mg_cfg.
But i see anything in the Log program after restart the box.
It´s possible to see the log direct in the box?

[suma]

1. Leave only mg_cfg and newcamd.list, delete all other files.
2. If log-file is not running, it means that MgCamd is not running as well. Log-file must show any information if MgCamd is running.
3. Log-file must look like this: https://www.cardsharing.cc/index.php?topic=32632.0

Are you sure your receiver is connected to the server? Can you see FTA channels?

[Miguel]

I delete all files from usr/keys except mg_cfg and newcamd.list
Also i delete etc/cccam.cfg 
Then i uninstall all emus and leave only mgcamd 1.35a on my box.
Restart box.

I have black screen with Sky, FTA channels runs fine.
Before i delete all this files, with cccamd 2.3.0 all run fine, except the freezes with dual login.

The log not run

[suma]

Question: how did you install MgCamd 1.35 on your Dreambox and how you run it?

[Miguel]

I open the Blue Panel (GP3), then i select "Addons", then the folder "Gemini CamConf", then i choose and install the file"gp-conf-mgcamd"
Then i go one step back and enter in folder "Gemini SoftCamd", then i choose and install the file "gp-cam-mgcamd-1.35a"
Reboot the box
Open Blue panel and select "CI-Softcam", then i choose Mgcamd 1.35a and restart the box.

[suma]

OK, how did you run MgCamd? How did you make it running?