Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10  (Прочитано 7440 раз)

yp

  • Новичок
  • *
  • Сообщений: 4
Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10
« : 07 Сентября 2013, 16:59:07 »
 Hello all,

I have an old set of configs for my Dreabox 500S. It used to work with MgCamd 1.30 and Newcamd 6.10. I tried to get a test line from here and added it to my newcamd file but it doesnt work. Do you see anything wrong in my setup below?

The relevant log follows (after trying to tune to BT Sport 1).

root@dreambox:/var/keys> [mgcam] emm thread started
[mgcamd] tps update started.
[newcamd] Connecting to serv5:59097...
[newcamd] Login to serv5:59097 as 9734528 accepted (59ms)
[newcamd] Card data from serv5:59097 (157ms):
Userid 14 caid 963 providers 1
Idents: 000000

got 8 cmd 9F
got 113 cmd 9F
[newcamd-v6.10 13:50:01] stop decoding servid 13f4, pmt 0107.
[mg0] namespace 11A0000 t-id 964 on-id 2
[mg0] descramble on 1, source 0
[mg0] service C4BE index 0 pmt pid 11B (2)
[newcamd-v6.10 13:50:01] start decoding servid c4be, pmt 011b.
[newcamd-v6.10 13:50:01] can't decode
 ECM: CaID: 0x0961  -> CaPID: 0x0505 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0505 failed to decode.
[mgcamd] emm started
 EMM: CaID: 0x0960  -> CaPID: 0x00C0 ProvID: 000000
 EMM: CaID: 0x0961  -> CaPID: 0x00C0 ProvID: 000000
 EMM: CaID: 0x0963  -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped

My mg_cfg file is:

root@dreambox:/var/keys> cat mg_cfg

M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 00 }
O: { 00 } username password
S: { 03 } 80
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }

The test line is in my newcamd.list:
root@dreambox:/var/keys> cat newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = serv5 59097 9734528 0148095 01 02 03 04 05 06 07 08 09 10 11 12 13 14

And the output of my ps command is:

root@dreambox:/var/keys> ps -ax
  PID  Uid     VmSize Stat Command
    1 root        544 S   init       
    2 root            SWN [ksoftirqd/0]
    3 root            SW< [events/0]
    4 root            SW< [khelper]
    5 root            SW< [kblockd/0]
    6 root            SW  [pdflush]
    7 root            SW  [pdflush]
    9 root            SW< [aio/0]
    8 root            SW  [kswapd0]
   10 root            SW  [cifsoplockd]
   11 root            SW  [cifsdnotifyd]
   12 root            SW  [mtdblockd]
   14 root        544 S   init       
   15 root        552 S   /bin/sh /etc/init.d/rcS
   23 root            SW< [fe_thread]
   32 root            SWN [jffs2_gcd_mtd1]
   57 root        592 S   /sbin/inetd
   75 root        608 S   /sbin/dropbear
  146 root        736 S   /bin/gdaemon
  147 root      12024 S   /bin/enigma
  148 root      12024 S N /bin/enigma
  155 root      12024 S   /bin/enigma
  156 root      12024 S N /bin/enigma
  173 root      12024 S   /bin/enigma
  210 root      12024 S N /bin/enigma
  228 root        412 S   telnetd
  229 root        808 S   -sh
  249 root        956 S   newcamd_6.10b
  266 root       1208 S   mgcamd_1.30 -v
  267 root       1208 S   mgcamd_1.30 -v
  268 root       1208 S   mgcamd_1.30 -v
  271 root       1208 S   mgcamd_1.30 -v
  273 root       1164 S   mgcamd_1.30 -v
  274 root       1164 S   mgcamd_1.30 -v
  275 root       1164 S   mgcamd_1.30 -v
  277 root       1164 S   mgcamd_1.30 -v
  278 root       1164 S   mgcamd_1.30 -v
  279 root       1164 S   mgcamd_1.30 -v
  282 root        640 R   ps -ax

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10
« Ответ #1 : 07 Сентября 2013, 17:32:18 »
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

yp

  • Новичок
  • *
  • Сообщений: 4
Re: Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10
« Ответ #2 : 08 Сентября 2013, 15:32:32 »
Hello,

Thanks for your message. I tried to install mgcamd 1.35 as you suggested but I still cant see anything on BT Sport 1.  Is there anything else I m doing wrong?

I get the following mgcamd log now:

root@dreambox:/var/keys> mgcamd_1.35a
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 21:33:33)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:1 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:4
[mg] Ecm cache time: 15
Box type: dreambox
/dev/dvb/card0/ca0 error 16: Device or resource busy
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = 3297038:serv5:49868
newcamd keep alive: 300, incoming port: 12000
network port 12000 open: bind error 98: Address already in use
root@dreambox:/var/keys> [mgcam] emm thread started
[newcamd] Connecting to serv5:49868...
[newcamd] Login to serv5:49868 as 3297038 accepted (52ms)
[newcamd] Card data from serv5:49868 (103ms):
Userid 14 caid 963 providers 1
Idents: 000000

got 113 cmd 9F
[mg0] namespace 11A0000 t-id 964 on-id 2
[mg0] descramble on 1, source 0
[mg0] service C4C8 index 0 pmt pid 105 (1), pids: video 0x0901, audio  0x0902 0x0903 0x0904
[mg0] ECM: CaID: 0x0960  -> CaPID: 0x0504 ProvID: 000000
[mg0] ECM: CaID: 0x0961  -> CaPID: 0x0504 ProvID: 000000
[mg0] ECM: CaID: 0x0963  -> CaPID: 0x0504 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0504 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0504 failed to decode.
[mg0] -> ECM to newcamd serv5:49868
[mg0] network can't decode
[mg0] pid 0x0504 failed to decode.
[mgcamd] emm started
 EMM: CaID: 0x0960  -> CaPID: 0x00C0 ProvID: 000000
 EMM: CaID: 0x0961  -> CaPID: 0x00C0 ProvID: 000000
 EMM: CaID: 0x0963  -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] stoping camd..
/dev/dvb/card0/ca0 error 16: Device or resource busy
/dev/dvb/card0/ca0 error 16: Device or resource busy
[mg0] stopped
got 138 cmd 9F
[mg0] namespace 11A0000 t-id 7E5 on-id 2
[mg0] descramble on 1, source 0
[mg0] service 1070 index 0 pmt pid 100 (7), pids: video 0x0204, audio  0x0298 0x0284 0x0244
[mg0] ECM: CaID: 0x0963  -> CaPID: 0x0514 ProvID: 000000
[mg0] ECM: CaID: 0x0961  -> CaPID: 0x0514 ProvID: 000000
[mg0] ECM: CaID: 0x0960  -> CaPID: 0x0514 ProvID: 000000
[mg0] -> ECM to newcamd serv5:49868
[mg0] network can't decode
[mg0] pid 0x0514 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0514 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0514 failed to decode.
[mgcamd] emm started
 EMM: CaID: 0x0960  -> CaPID: 0x00C0 ProvID: 000000
 EMM: CaID: 0x0961  -> CaPID: 0x00C0 ProvID: 000000
 EMM: CaID: 0x0963  -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[newcamd] no answer from serv5:49868 for last 5 messages
[newcamd] Connecting to serv5:49868...
[newcamd] Login to serv5:49868 as 3297038 accepted (53ms)
[newcamd] Card data from serv5:49868 (105ms):
Userid 14 caid 963 providers 1
Idents: 000000

[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10
« Ответ #3 : 08 Сентября 2013, 17:34:27 »
Free test
Channel name:Disc. History
Frequency:   11876H 27500 2/3 DVB-S
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

yp

  • Новичок
  • *
  • Сообщений: 4
Re: Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10
« Ответ #4 : 08 Сентября 2013, 20:20:48 »
Sorry what does that mean?

yp

  • Новичок
  • *
  • Сообщений: 4
Re: Old dreambox 500S with MgCamd 1.30 and Newcamd 6.10
« Ответ #5 : 08 Сентября 2013, 20:30:59 »
Got it! Thanks!