Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => SkyLink HD 23E => Тема начата: dusan37 от 03 Мая 2016, 09:38:22
-
Dear Moderator
is any idea on why there is my CS not decoding almost all Premium channels for package Skylink 23E (for example Disney, TV Paprika, HBOs, Nickelodeon, and many more) please ?
Instead of decoding I got only messages like "Requests rejected 383 - Channel not decoded 383" till now..
Any solution in sight ?
nice regards
dusan
-
Skylink is not working...................VIP ALL!!!
-
I have the same problem. Most of the channels are encrypted. Failure of the morning 05/03/2016. :-\
-
We'll check
-
Dear Moderator
any news ?
some solution ?
till now I have got achieved as much as "Requests rejected 496" - not that I got banned through that ! wouldn´t I ?
dusan
-
I have the same problem. Most of the channels are encrypted. I have discovered it this morning. Basic package channels is running, but premium don´t (Nova Sport HD, HBO HD and others).
I am sorry for my bad English.
-
The same problem, VIP ALL !! Skylink is not ...
-
Moderator is notified on the problem, trying to fix it ASAP
-
Problem fixed, check it, plz
-
..........It works thanks!
-
Dear Moderator
today early morning I posted over here that you I can hardly watch any channel on my prescription SL23E. Then later today you messaged that the problem is fixed.
I do not think so :
I just came from work looking forward to enjoy watching channels but you took me straight with so large suprise saying there in my connection history :
"Important!
Serious rules violations detected! Your account may be disabled!
Please study the history below and read recommendations how to eliminate problems
Violations
Number of requests from different emulators (receivers) 9"
ARE YOU KIDDING ME MAN ?
I was at work whole day long - how could I connect top my account using different emulator (different receiver) - do you suggest I watch TV in my job ??
Do not bother me please and kindly reset these baseless alleged VIOLATIONS against me please.
nice day
dusan
-
ARE YOU KIDDING ME MAN ?
I was at work whole day long - how could I connect top my account using different emulator (different receiver) - do you suggest I watch TV in my job ??
If you (or any other user) leave your receiver in stand-by mode when going to office or wherever, it (your receiver) is going on sending requests to the server. Did you know that? It means that emulator (even in stand-by mode) is active and supports connection to the server.
Restart your receiver and go on watching. Statistics is zeroed next morning.
-
Hello
thanks for your reply.
I really did not know about the fact that my set-up box sends anything while switched off.
Still it is the very same receiver/emulator as it was today earlier morning anyway and neither any other nor any different one.
let me restart the device
let me hope this situation does not come up again for pretty long time :)
bye
dusan
-
I just came from work looking forward to enjoy watching channels but you took me straight with so large suprise saying there in my connection history :
...
ARE YOU KIDDING ME MAN ?
I was at work whole day long - how could I connect top my account using different emulator (different receiver) - do you suggest I watch TV in my job ??
You have disconnected at 15:25 (Moscow time) [2016/05/03 15:25:32] - Client disconnected: login=dusan37, ip=188.XXX.XXX.X:XXXXX, port=XX200, protocol=Cccam, uid=XXXXX, was-connected=1801 secа
When at 17:20 you connected again, 2 connections were created by your receiver
[2016/05/03 17:20:26] - Connection accepted: ip=188.XXX.XXX.X:XXXXX, port=XX200, uid=XXXXXX, protocol=Cccam
Ask your receiver - why it created 2 connections at a time? You have to know that only 1 (one) connection at a time is allowed.
If you are using Ariva (one of the models blacklisted on our server) - https://www.cardsharing.cc/index.php?board=54.0, be sure to check for new firmware more frequently
-
Hello
I use amiko mini hd se in this room at home. Honestly there I noticed I had 2 connections at once - One to the main server (server74) and second one to the backup one (server_39). If that was a problem alone it must be solved by now as I disconnected the backup one just to stay safe. And BTW normally I update its software on regular basis almost every month.
Thanks for your advice anyway.
Bye
Dusan
-
Problem fixed, check it, plz
Very thanks. All OK. Good job.
Nice day
-
Hello,premium programs not work.Please check
-
Skylink 23,5 premium channel not working
(HBO. FilmBox, all Viasast,History,Leo,Cinemyx, Axn,........)
working only CT1,ct2,nova,... - only chanenls in basic offer in Skylink
packet
-
We'll check
-
Hello
Skylink will be fixed in 2-3 hours
-
well done,
skylink - all the work corect :)
-
Hello,HBO programs not work.Please check
Frequent problems on skylink package...
Fix it
-
Hi, we'll check. Which particular channels do not work for you?
Where is your log-file? Which server?
-
НВО3
[mg0] -> ECM to cccamd server_14:XXX01 (00000071)
[mg0] <- CW from cccamd server_14:XXX01 (122ms)
[mg0] 122 msec -- Mon Jul 11 12:10:33 2016
system: Cryptoworks
caid: 0x0D96
pid: 0x02e6
prov: 000004
cw0:0 DC 40 6C 88 5B 2D 53 DB
cw1:0 D1 CA EC 87 D8 C1 5E F7
НВО2
[mg0] -> ECM to cccamd server_14:XXX01 (00000071)
[mg0] <- CW from cccamd server_14:XXX01 (128ms)
[mg0] 128 msec -- Mon Jul 11 12:11:05 2016
system: Cryptoworks
caid: 0x0D96
pid: 0x02f3
prov: 000004
cw0:0 F1 70 78 D9 19 FD B8 CE
cw1:0 9E E4 4C CE 34 17 46 91
НВО HD
[mg0] -> ECM to cccamd server_14:XXX01 (00000071)
[mg0] <- CW from cccamd server_14:XXX01 (118ms)
[mg0] 118 msec -- Mon Jul 11 12:11:37 2016
system: Cryptoworks
caid: 0x0D96
pid: 0x02e5
prov: 000004
cw0:0 A4 44 E4 CC B9 16 8A 59
cw1:0 F3 3E F5 26 23 03 36 5C
-
Frequent problems on skylink package...
What kind of problems?
You know, kura1, I will ban you next time if you don't provide log-file, with detailed description of your "problems".
This is my last warning.
-
HBO HD for Vip Czech:
[mg0] -> ECM to cccamd server_258:XXX03 (00000066)
[mg0] <- CW from cccamd server_258:XXX03 (125ms)
[mg0] 125 msec -- Mon Jul 11 12:16:37 2016
system: Cryptoworks
caid: 0x0D96
pid: 0x02e5
prov: 000004
cw0:0 BC 5E 4C 66 AF 08 49 00
cw1:0 13 C4 C0 97 CD 23 63 53
-
Hello, I cannot decode premium progs (HBO's, Viasat's, porn) :(
non-premium content (e.g. Nova HD, Prima COOL, etc) are OK.
i've tried CCC and Newcamd protocols.
thanks.
Last request for decoding received by the server at 08:25:59 (CET)
Channel: HBO Czechia (skylink)
SID: 0307 (775d)
CAID@IDENT: 0D96@000004
For port: XXXXX
Requests received 703
Duplicated requests 2
Requests decoded 51
Requests rejected 652
- Channel not decoded 652
-
I have the same problem as deko.
Last request for decoding received by the server at 08:49:24 (CET)
Channel: RTV 1 (Slovakia) (skylink)
SID: 1329 (4905d)
CAID@IDENT: 0D96@000004
For port: 20200
Requests received
340
Requests decoded
183
Requests rejected
157
- Channel not decoded 157
KeepAlive requests
326
-
I have the same problem. Skylink 23E not working.
-
all channels?
-
same here
-
Moderator notified
-
Hallo,
I have problem, because from 4.1.2017 doesnot work any programms except the base package.
Last request for decoding received by the server at 11:15:22 (CET)
Channel: HBO Czechia (skylink)
SID: 0307 (775d)
CAID@IDENT: 0D96@000004
For port: 20032
Requests received 723
Duplicated requests 1
Requests decoded 360
Requests rejected 363
- Channel not decoded 363
KeepAlive requests 94
-
Shall work now, pls check it
-
works fine, thanks a lot.
-
Programs are working. Receiver off/on.
-
Thanks very much. It works.
-
last few days i have multiple outages lasting few seconds with mgcamd
[mg0] Cryptoworks prov 4
[mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
it then continues without any action
anybody with the same problems?