Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Emulator Mgcamd 1.45c (MIPS and SH4) with SkyDe support  (Прочитано 52562 раз)

teglafal

  • Постоялец
  • ***
  • Сообщений: 58
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #40 : 20 Апреля 2019, 16:31:23 »
So anyone using PC for viewing Sky channels are now unable to do it..?
HW: SkyStar HD2
SW: DVBViewer + Oscam 1.20 - dvbapiNET
Package: VIP Germany

teglafal

  • Постоялец
  • ***
  • Сообщений: 58
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #41 : 20 Апреля 2019, 20:15:37 »
After lots of hours, I have to say: with PC, Sky is not working at the moment. Tried Oscam via Acamd to DVBViewer, connected well, keys seems to be okay but still no picture. I hope my account wont get banned because of this, it was an experiment and I was hoping that I will find a solution and can help myself and for other users, but no, at the moment, this is not working either. This will be a serious problem for PC users with viewer application, hopefully a solution will come or this has something with the current situation.
HW: SkyStar HD2
SW: DVBViewer + Oscam 1.20 - dvbapiNET
Package: VIP Germany

Chicken

  • Новичок
  • *
  • Сообщений: 7
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #42 : 21 Апреля 2019, 09:36:38 »
Hi!

Windows software can directly communicate with oscam via dvbapi (plugin is called mdvbapi). I got this going and is working, but many channels still stay dark even with disablecrccws
I've already tried several different oscam versions, but not too much success right now.

oscam.conf:
[dvbapi]
enabled = 1
boxtype = pc
user = dvbapi
listen_port = 11500

oscam.server:
[reader]
label       = "main_cardsharing.cc_20027"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = server_87,20027
user        = ***
password    = ***
group       = 1
audisabled  = 1
disablecrccws = 1
inactivitytimeout = 300
ident     = 098C:000000

oscam.user
[account]
user = dvbapi
group = 1

I will keep you updated if I get it going.
best regards.

fmarios2

  • Новичок
  • *
  • Сообщений: 4
Emulator Mgcamd 1.45c with SkyDe support
« Ответ #43 : 21 Апреля 2019, 11:12:30 »
Hello,

it gets complicated with all these posts. Can someone post the steps one by one in a simple way of what should be done in order to watch again SKY DE?
When you unzip the Mgcamd 1.45c, the file mgcamd1.45b_mips, in which folder should be placed?
Is it placed as it is or it should be renamed?
Can anyone say if Sky Sports 1 HD is working?

My receiver is Dreambox 8000HD. Also I had installed Mgcamd 1.38.

Thanks.


telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #44 : 21 Апреля 2019, 11:21:47 »
look at:
/usr/bin

here is my mgcam 1.35 on dream 7020 HD

overwrite it (make a backup of the original)
rename it to the name it was before
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #45 : 21 Апреля 2019, 12:04:13 »
I do this but ORF not work with OSCAM and newcamd protocol only with cccam protocol on my receiver. Rest is o.k. without problems! :-)


ORF also works with Oscam and Newcamd protocol
If you get it working by switching from newcamd to ccam protocol only (leave other files and configuration as it is, there is something wrong in the reader configuration
if you use ccam protocol with several caids running through one reader, you should use the paramter disablecrccws_only_for = 098C:000000 to disable this chedksum-config only for caid 098c (if you use newcamd protocol there is only caid 098c running on the reader, so no need to specify)
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #46 : 21 Апреля 2019, 12:42:30 »
what should I say
are you sure reader for ORF is configured correctly ? is this newcamd-reader connected ??
CCcam makes it easier to setup because wirh server, port,username and password the other settings are delivered by server = most likely correct.
User-config and additional files like oscam.dvbapi or oscam.server should not be a problem (if existing at all, without these files as adived by server-support also no problem or course) as it works with CCcam-protokoll

for CCcam-protokol you can watch the assigned cards (caids etc): which ident numbers do you see for 0D95 (ORFcard) ? only 000004 or anything else ?
I assume you configured the ORF reader as shown in the config: ident = 0D95:000004
Some receivers have problems with correct ident detection (usually result in 000000)
you might try to remove the parameter ident = on the newcamd ORF reader and replace it with the parameter: caid = 0D95
That could be a reason if "only switching reader to CCcam-protocol" solves the problem
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

teglafal

  • Постоялец
  • ***
  • Сообщений: 58
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #47 : 21 Апреля 2019, 12:50:50 »
Hi!

Windows software can directly communicate with oscam via dvbapi (plugin is called mdvbapi). I got this going and is working, but many channels still stay dark even with disablecrccws
I've already tried several different oscam versions, but not too much success right now.

oscam.conf:
[dvbapi]
enabled = 1
boxtype = pc
user = dvbapi
listen_port = 11500

oscam.server:
[reader]
label       = "main_cardsharing.cc_20027"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = server_87,20027
user        = ***
password    = ***
group       = 1
audisabled  = 1
disablecrccws = 1
inactivitytimeout = 300
ident     = 098C:000000

oscam.user
[account]
user = dvbapi
group = 1

I will keep you updated if I get it going.
best regards.
Hello! Thanks for the suggestion, configured mdvbapi and yes, it can communivate with oscam, but channels are still dark for me too :( (however, its a better and beauty way than acamd + oscam)
HW: SkyStar HD2
SW: DVBViewer + Oscam 1.20 - dvbapiNET
Package: VIP Germany

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #48 : 21 Апреля 2019, 12:52:17 »
I have no  problems with other caids and OSCAM with newcamd and i use the settings from the newcamd list here in my section, with this ORF is dark. I not understand why only the ORF has the problem and all the other caids running with same settings perfekt? i have OSCAM version r11514

[reader]
label       = "main_cardsharing.cc_20154"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = server_28,20154
user        = xxxxxxxxxxx
password    = xxxxxxxxxxxxxxxx
group       = 1
audisabled  = 1
disablecrccws = 1
inactivitytimeout = 300
ident     = 0D95:000004

what should I say
are you sure reader for ORF is configured correctly ? is this newcamd-reader connected ??
CCcam makes it easier to setup because wirh server, port,username and password the other settings are delivered by server = most likely correct.
User-config and additional files like oscam.dvbapi or oscam.server should not be a problem (if existing at all, without these files as adived by server-support also no problem or course) as it works with CCcam-protokoll

for CCcam-protokol you can watch the assigned cards (caids etc): which ident numbers do you see for 0D95 (ORFcard) ? only 000004 or anything else ?
I assume you configured the ORF reader as shown in the config: ident = 0D95:000004
Some receivers have problems with correct ident detection (usually result in 000000)
you might try to remove the parameter ident = on the newcamd ORF reader and replace it with the parameter: caid = 0D95
That could be a reason if "only switching reader to CCcam-protocol" solves the problem
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #49 : 21 Апреля 2019, 13:15:04 »
do you watch porn ? (I am not sure which CAID is used but I assume the 0100 or 0500 - both caids have idents different from 000000)
and all the other readers have no problem, as ident 000000 is usual (HDplus, MTV, Sky)

I take a look at my config and was wondering why ident is missing: obviously my reader is having problems with ident 000004 :) (but its so long ago I configured it...)
As advised to you I only use parameter caid = 0D95 what works fine with newcamd-protocol
Also successfull to use ident = 0D95:000000,000004

As it works for you and CCcam protocol (which I have not even configured): what are the shown idents for the ORFcard/0D95 in the details/information of the assigned cards ? (that is only for my interest)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #50 : 21 Апреля 2019, 13:21:22 »
So now i understand your msg and delete the ident= and add the caid = 0D95 -> and wonder now ORF works with newcamd!!!! That is strange! But many thx for this solution!


do you watch porn ? (I am not sure which CAID is used but I assume the 0100 or 0500 - both caids have idents different from 000000)
and all the other readers have no problem, as ident 000000 is usual (HDplus, MTV, Sky)

I take a look at my config and was wondering why ident is missing: obviously my reader is having problems with ident 000004 :) (but its so long ago I configured it...)
As advised to you I only use parameter caid = 0D95 what works fine with newcamd-protocol
Also successfull to use ident = 0D95:000000,000004

As it works for you and CCcam protocol (which I have not even configured): what are the shown idents for the ORFcard/0D95 in the details/information of the assigned cards ? (that is only for my interest)
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #51 : 21 Апреля 2019, 13:31:34 »
which file I have to edit for  caid = 0D95 ?
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #52 : 21 Апреля 2019, 13:33:38 »
oscam.server

[reader]
label       = "main_cardsharing.cc_20154"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = server_28,20154
user        = xxxxxxxxxxx
password    = xxxxxxxxxxx
group       = 1
audisabled  = 1
disablecrccws = 1
inactivitytimeout = 300
caid = 0D95

and the backup, too

works for me
which file I have to edit for  caid = 0D95 ?
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #53 : 21 Апреля 2019, 13:34:14 »
thank you captain....
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #54 : 21 Апреля 2019, 13:38:39 »
btw: ist better to delete the server name here (device) ?

0D95 was already as entry in my file...
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #55 : 21 Апреля 2019, 13:46:21 »
oh yes can be, but i cannot change this now :-(

btw: ist better to delete the server name here (device) ?

0D95 was already as entry in my file...
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #56 : 21 Апреля 2019, 13:48:34 »
ORF is still okay with mgcam but not with oscam....
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #57 : 21 Апреля 2019, 14:03:00 »
I meant it as an advise to use:
0D95:000000,000004
(only line, or in addition to caid = 0D95)

ORF uses know ident 000004 (but some receivers have problems with this so its neccessary to add 000000 even if not really in use by ORF)
as fare as I know ORF also (sometimes) serve ident 000010 or 00000C - both not supported by server
As long as ORF only uses 000004 and/or your receiver prefer ident 000004 everything is fine but you might get rule violations with other idents (and the codeword is not compatible, the calculated codeword for ident 000004 will not work if ORF switch to another ident even if your Oscam send the ECM to ident 00004)

BTW: as I see in the server configuration below "my subscriptions" all readers are now have the new parameter disablecrccws = 1.
The new parameter added for new Sky Germany encoding is only required for reader 098C/Sky-Germany not the other once.
And for CCcam-protocol best to use is
disablecrccws_only_for = 098C:000000 as it only use the parameter on CAID 098C even if the reader is for all the other caids in your package as well.
But the parameter disable...only_for is not so old (so an older version of Oscam might not support this feature). Parameter disablecrccws was added to Oscam in October 2011 while disablecrccws_only_for was added in 2016 - http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.server#disablecrccws
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #58 : 21 Апреля 2019, 14:37:13 »
so i change this to

ident     = 0D95:000000,000004

and it works, too!

I meant it as an advise to use:
0D95:000000,000004
(only line, or in addition to caid = 0D95)

ORF uses know ident 000004 (but some receivers have problems with this so its neccessary to add 000000 even if not really in use by ORF)
as fare as I know ORF also (sometimes) serve ident 000010 or 00000C - both not supported by server
As long as ORF only uses 000004 and/or your receiver prefer ident 000004 everything is fine but you might get rule violations with other idents (and the codeword is not compatible, the calculated codeword for ident 000004 will not work if ORF switch to another ident even if your Oscam send the ECM to ident 00004)

BTW: as I see in the server configuration below "my subscriptions" all readers are now have the new parameter disablecrccws = 1.
The new parameter added for new Sky Germany encoding is only required for reader 098C/Sky-Germany not the other once.
And for CCcam-protocol best to use is
disablecrccws_only_for = 098C:000000 as it only use the parameter on CAID 098C even if the reader is for all the other caids in your package as well.
But the parameter disable...only_for is not so old (so an older version of Oscam might not support this feature). Parameter disablecrccws was added to Oscam in October 2011 while disablecrccws_only_for was added in 2016 - http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.server#disablecrccws
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #59 : 21 Апреля 2019, 16:08:16 »
for anyone looking for a working Oscam: check the attachment, some Oscam files version r11516 for several receivers are included (you should be aware of which one is the correct one for your STB

Even if I do not noticed problms with older Oscam versions, there is a bug in the disablecrccws-function in oolder Oscam releases, see, https://www.digital-eliteboard.com/threads/bugfix-disablecrccws_only_for-loesung-fuer-freezer-seit-sky-cw-umstellung-geloest-mit-oscam-11516.472709/
Der Bug sorgte dafür, dass wenn es sich um ein Odd-CW (0000XXXX) handelt und das 1. "Checksummenbyte"(12. CW Byte)
zufällig der tatsächlichen Checksumme entspricht das 2. "Checksummenbyte"(16. CW Byte) korrigiert wurde. Solche CWs
treten seit der Einführung der 64bit CWs bei Sky ein paar mal am Tag auf, immer an diesen Stellen freezt es exakt 7 Sekunden
lang, wenn man disablecrcws_only_for mit einer OScam <r11516 nutzt.
Anmerkung: Es geht natürlich hier rein um die Checksummen-Bytes, um eine Fehlfunktion der OScam die damit zusammenhängt
zu erklären, es gibt keine Checksumme bei 64bit CWs, alle 8 Bytes sind Zufall!
Most users interested in this files most likely are German speaking persons.
Basically the news explain, that older versions beloe revision 11516 might create freezers 2-3 time a day because of a bug in the disablecrccws-funktion (put it in a translator yourself)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP