You have downloaded and installed the software on you PC (see attached file below).
Before running it, make appropriate settings in your mg_cfg file.
Specify IP address of your PC in the L parameter line leaving 514 port as it is. It is used for connecting PC to the receiver. Warning! Check if 514 port is allowed by your firewall, otherwise you will wait for the log-file forever!
After editing, save and close. Restart emulator.
Run 3CSyslog. You will see the following window:
File--> Configure
Select Security settings sub-folder and add IP of your receiver.
Then, open Log-file destination sub-folder and appoint the route to the folder where your log-file is to be saved.
Finally, you will get the following:
In your C:\Program Files\3Com Corp folder, after the first run of the software, you will see syslog.log file which can be opened and edited using notepad or any text editor.
Log-file shall look like this:
Feb 19 08:58:08 192.168.1.35 ----------------------------------------------------
Feb 19 08:58:08 192.168.1.35 000: 80 00 3f 56 0e 02 56 00 00 4d 5f 31 ad a5 25 00 ..?V..V..M_1..%.
Feb 19 08:58:08 192.168.1.35 010: c4 8a 71 94 60 1b 4b a8 ee 78 eb a6 01 42 60 8f ..q.`.K..x...B`.
Feb 19 08:58:08 192.168.1.35 020: b4 1a 73 97 72 fe fe fe 3a 4b 02 fe fe fe fe fe ..s.r...:K......
Feb 19 08:58:08 192.168.1.35 030: fe fe fe fe fe fe fe fe fe fe fe fe fe fe 90 18 ................
Feb 19 08:58:08 192.168.1.35 040: f0 c5 ..
Feb 19 08:58:08 192.168.1.35
Feb 19 08:58:09 192.168.1.35 Client <- Server: -- Sat Feb 19 02:57:59 2011
Feb 19 08:58:09 192.168.1.35 ----------------------------------------------------
Feb 19 08:58:09 192.168.1.35 000: 80 10 10 38 2c fe 62 4d 80 7a 47 6f a7 2e 44 d9 ...8,.bM.zGo..D.
Feb 19 08:58:09 192.168.1.35 010: 1b d9 cd ...
Feb 19 08:58:09 192.168.1.35
Feb 19 08:58:09 192.168.1.35 [mg0] <- CW from newcamd XX.XXX.XXX.X (server IP):port (702ms)
Feb 19 08:58:09 192.168.1.35 [mg0] 702 msec -- Sat Feb 19 02:57:59 2011
Feb 19 08:58:09 192.168.1.35 ===== @Sky ECM on CaID 0x4AE1, pid 0x0078 ======
Feb 19 08:58:09 192.168.1.35 prov: 000000
Feb 19 08:58:09 192.168.1.35 cw0:0 38 2C FE 62 4D 80 7A 47
Feb 19 08:58:09 192.168.1.35 cw1:0 6F A7 2E 44 D9 1B D9 CDThe lines highlighted are the main lines from where is it seen that the keys from the server are received by your receiver. You see CAID (0x4AE1) and IDENT (prov: 000000) of the provider.
P.S. Be sure that connection is allowed by your firewall.
That's all!
P.S. Please be noted that it is prohibited to openly show server name and port No.!!!Your log-file must be just as provided above:
Feb 19 08:58:09 192.168.1.35 [mg0] <- CW from newcamd servX(server name):XXXXX (port) (702ms)
Feb 19 08:58:09 192.168.1.35 [mg0] 702 msec -- Sat Feb 19 02:57:59 2011
Feb 19 08:58:09 192.168.1.35 ===== @Sky ECM on CaID 0x4AE1, pid 0x0078 ======
Feb 19 08:58:09 192.168.1.35 prov: 000000
Feb 19 08:58:09 192.168.1.35 cw0:0 38 2C FE 62 4D 80 7A 47
Feb 19 08:58:09 192.168.1.35 cw1:0 6F A7 2E 44 D9 1B D9 CDIf the channel cannot be encoded, your log-file looks like this:
Nov 01 20:25:46 192.168.1.34 [mg0] newcamd route serv3:XXXXX cant decode (128ms)
Nov 01 20:25:47 192.168.1.34 [newcamd] Ping to serv3:XXXXX...
Nov 01 20:25:47 192.168.1.34 [newcamd] Pong from serv3:XXXXX (126ms)
Nov 01 20:25:47 192.168.1.34 ECM to newcamd serv3:XXXXX
Nov 01 20:25:47 192.168.1.34 Server: -- Fri Nov 1 20:25:40 2013
Nov 01 20:25:47 192.168.1.34 ----------------------------------------------------
Nov 01 20:25:47 192.168.1.34 000: 81 70 b4 00 00 01 14 ca 01 73 2b 1f ac 00 00 81 .p.......s+.....
Nov 01 20:25:47 192.168.1.34 010: 21 84 01 00 01 01 02 0e 00 00 82 9b 7d 09 44 7f !.............D.
Nov 01 20:25:47 192.168.1.34 020: ab 7d 20 4e 76 67 83 90 8e c0 02 97 b9 94 80 45 .. Nvg.........E
Nov 01 20:25:47 192.168.1.34 030: 5a 02 66 aa d6 48 6b 8f d5 00 d7 a7 d1 5f 86 3a Z.f..Hk......_.:
Nov 01 20:25:48 192.168.1.34 040: f0 cc d7 29 6b 13 b0 20 f4 65 c6 78 5b 40 39 f6 ...)k.. .e.x[@9.
Nov 01 20:25:48 192.168.1.34 050: 54 ca b9 bc 09 6a 26 a1 4c 91 28 d4 dc 2a 28 4f T....j&.L.(..*(O https://www.cardsharing.cc/index.php?topic=32076.0