Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: vu+ solo2 astra package MTV HD problem  (Прочитано 13212 раз)

viktorw

  • Пользователь
  • **
  • Сообщений: 40
vu+ solo2 astra package MTV HD problem
« : 06 Октября 2015, 15:40:22 »
hello.

i used before cccam 2.3.0 and every channel worked fined. but since some days i have sometimes freezers, so today i've changed to mgcamd 1.38
i took the config from your site and the channels work fine but only MTV HD (germany) doesn't work.

priority.list
V: { 04 06 00 }
V: { 04 28 00 }
X: { 06 02 }
X: { 06 52 }
X: { 09 63 }
X: { 4A E1 }
X: { 0D 96 }
X: { 18 33 }


mg_cfg

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32   cccamd netclient, card list saved as /tmp/cccamd.info
#       (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 360 3600

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 02 } root password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 31 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }


so what now?
please help
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: vu+ solo2 astra package MTV HD problem
« Ответ #1 : 06 Октября 2015, 19:03:34 »
What are the channel parameters? Frequency, modulation, etc.
Astra package is tooooo large
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: vu+ solo2 astra package MTV HD problem
« Ответ #2 : 06 Октября 2015, 21:58:51 »
channel parameters: http://en.kingofsat.net/find.php?question=mtv+germany&Submit=Zap (Astra 1L of course)

I believe the problem is related to a problem of HD+ package, see https://www.cardsharing.cc/index.php?topic=33752.0

I was wondering myself, don't know any other HD+channel which is not decoded by Sky-Germany NDS 098C-card but obviously this channel does not serve caid 098C like all the other HD+channelds do. I am not sure if this is a problem of the channel/transmission but as long as the HD+problem with caid 1830 is not solved the channel will remain black.
2015/10/06 20:52:24 1321618 c [ADD PID 0] CAID: 1830 ECM_PID: 1CF4 PROVID: 000000
2015/10/06 20:52:24 1321618 c [ADD PID 1] CAID: 1843 ECM_PID: 19F4 PROVID: 000000
2015/10/06 20:52:24 1321618 c [ADD PID 2] CAID: 1860 ECM_PID: 1EF4 PROVID: 000000
2015/10/06 20:52:24 1321618 c [ADD PID 3] CAID: 186A ECM_PID: 1DF4 PROVID: 000000
2015/10/06 20:52:24 1321618 c Found 4 ECMpids and 3 STREAMpids in PMT
2015/10/06 20:52:24 1321618 c New program number: 2777 (MTV HD) [pmt_list_management 3]
2015/10/06 20:52:25 1321618 c cooli (1830&000000/1CF4/0000/2777/92:C235): not found (793 ms) by HD-plus (F/1/0/0) - MTV HD
2015/10/06 20:52:26 1321618 c cooli (1830&000000/1CF4/0000/2777/92:63B2): not found (285 ms) by HD-plus (F/1/0/0) - MTV HD
2015/10/06 20:52:33 1321618 c cooli (1830&000000/1CF4/0000/2777/92:525C): not found (295 ms) by HD-plus (F/1/0/0) - MTV HD
there is no problem with a working HD+card. I have a card on my own (also caid 1830 like the one of the cs-server) and the channel works well

BTW @ viktorw:
you should remove caid 1833 (old Sky Germany Nagra card, not active anymore) from priority.list-file or even better replace it with 09 8C for new Sky Germany NDS card
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #3 : 07 Октября 2015, 16:01:11 »
Ok I'll try. Any other ideas how I should optimize the priority.list for German Astra channels ?
Sometimes I get freezers for example at pro7 fun hd 11875 frequency 27500mbits horizontal fec 3/4

It's annoying to get freezers although the Internet connection is fast enough 13mbits and 20-30 msec latency
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #4 : 07 Октября 2015, 16:05:07 »
How should my priority.list look like ?
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #5 : 07 Октября 2015, 17:08:26 »
now i've changed priority.list to

#HD+
X: { 18 30 }
X: { 0D 95 }
X: { 0B 00 }

# SKY Deutschland 19.2E
X: { 09 8C }
X: { 17 02 }
X: { 18 33 }

and ignore.list

X: { 18 43 }
X: { 18 60 }
X: { 18 6A }


still freezers
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: vu+ solo2 astra package MTV HD problem
« Ответ #6 : 07 Октября 2015, 18:01:29 »
with a VIP-Astra subscription I believe your priority.list should look like

X: { 09 8C }
X: { 18 30 }
X: { 0B 00 }
X: { 0D 95 }
X: { 18 10 }
X: { 01 00 }

what is for HD+(including MTV Germany HD), Sky Germany, ORF/AustriaSat, MTV-Viacom,  spanisch D+  and netherlands Canaal Digital.

If you also have an ignore.list make sure none of these CAIDs are listed there (or remove it completely, with a fine configured priority.list and VIP-Astra subscription a ignore.list is not really required

To optimize mg_cfg I would suggest to change parameters to:
C: { 00 }
U: { 01 }
O: { 00 }    # no one will send you a message on the TV screen, if you violate the rules you will receive an email *g*
L: { 00 }     # especially with the IP you defined to send it to - this is no local lan-ip (starting with 192.168. .) are you aware where you send your logfiles too ?
E: { 15 }     # for fast switching back to former channel(s) without risking a rule vliolation
D: { 00 }     # don't take this personally: are you able to read and use logfiles to solve problems ? so why bothering your system and decrease performance by creating such files by default ?? for now it looks like your simply yelling "MTV is not working" without providing a logfile your system is busy to create all the time :)

G: { 32 }
looks like you use CCcam-Protocol to connect to the server. CCcam is nice and easy but if you use Mgcamd I would always suggest to use Newcamd protocol.
Go to the billing center > My subscription select Newcamd-protocol and safe the content of the "Mgcamd for Newcamd protocol" window on you box in the file newcamd.list (same directory where you have stored your cccamd.list), see explanation above the box.
Remove the cccamd.list to avoid problems (or simply rename it only), switch mg_cfg parameter G: { 32 } to G: { 01 }.
Restart Mgcamd or reboot your receiver (restart receiver if your not sure how to stop and restart Mgcamd to avoid rule violations)
BTW: MTV-problem was caused by server and should be solved since this morning.
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #7 : 08 Октября 2015, 11:18:04 »
Thank u. I'll try this today.
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #8 : 08 Октября 2015, 22:40:53 »
so i changed everything like you advised also from cccam to newcamd

but i still get freezers on hd+ and sky
i'm now on mgcamd 1.35
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #9 : 08 Октября 2015, 22:45:35 »
i wanted to try this
https://www.cardsharing.cc/index.php?topic=517.msg25574#msg25574

(i speak russian but it's hard to write ;) )
but if i try killall mgcamd it says "no process found" although mgcamd is running
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #10 : 08 Октября 2015, 23:15:10 »
here is the log file
first channel sky disney then other sky channel then pro7 hd+
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #11 : 08 Октября 2015, 23:33:36 »
i bigger log

i tried caid 1833 in ignore.list
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #12 : 08 Октября 2015, 23:58:19 »
i get freezers as soon as the box pings the server..... :o


LOG DELETED AS YOU DID NOT HIDE PORT NUMBERS
WARNING! SERVER RULES VIOLATION!
IT IS NOT ALLOWED TO SHOW PORT NO. AND SERVER NAME, READ THE RULES!

https://www.cardsharing.cc/index.php?topic=32632.0
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: vu+ solo2 astra package MTV HD problem
« Ответ #13 : 09 Октября 2015, 05:52:36 »
VU+ receivers are similar to Dreamboxes based on Enigma image. Typically, for these systems, no ignore and priority lists are required. Delete ignore.list, priority.list (or empty them completely) and restart emulator.
Use our default settings from https://www.cardsharing.cc/index.php?topic=28088.0 (also, before uploading ignore-priority files to your receiver, empty them). Only adjust mg_cfg file according to your type of receiver.
Read also the thread re: VU+ receivers https://www.cardsharing.cc/index.php?board=53.0 and find out which configuration is the best for your receiver.
If you failed and experience freezes again, reflash your receiver again and start from the beginning.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: vu+ solo2 astra package MTV HD problem
« Ответ #14 : 09 Октября 2015, 08:44:32 »
i get freezers as soon as the box pings the server..... :o

Check ping and route using WinMTR software. Probably, the route is not so good and loss can be recorded at any intermediate stops. Consequently, ask your internet provider to check the route to our server specifying the stops where the losses are recorded.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #15 : 09 Октября 2015, 13:35:59 »
here are the trace logs for the servers (both)
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: vu+ solo2 astra package MTV HD problem
« Ответ #16 : 09 Октября 2015, 13:58:29 »
From your logs I see that one server is OK, the other one is not. I suppose that the other one is back-up server, right? If so, delete it from config file and reboot. See what happens
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #17 : 09 Октября 2015, 18:51:30 »
Running on first server is better but sometimes I get freezer but not so often like before. But I remember the times when I had no freezer here it was only some month ago.
Maybe u check your second backup server or do I loose connection on my trace log ?
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: vu+ solo2 astra package MTV HD problem
« Ответ #18 : 09 Октября 2015, 19:28:38 »
Backup server is not very necessary to add. This is "in case" if anything happens with the main one. No need to check it, but for you, it is better to check internet connection to the backup server. Because nobody else is claiming against freezes on MTV, but you. And this means that with/or without backup server, the channel is running well. User Jogi and silence of other users is confirmation.
P.S. I think, Jogi has the same receiver that you have. Ask him for the most optimum firmware and settings (he has already recommended half of them)
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

viktorw

  • Пользователь
  • **
  • Сообщений: 40
Re: vu+ solo2 astra package MTV HD problem
« Ответ #19 : 09 Октября 2015, 20:47:52 »
Mtv is running with no problems but I sometimes get freezers but so often. Because you guarantee good connection with mgcamd and newcamd, that's why I try it but it's running not perfect.
VU+ Solo2 19.2E, Vip Astra , VTI Image 8.2.3 Mgcamd 1.35